WiFi Wireless Smart witch Home Relais Board Delay Modul APP Smart Home

EUR 8,53 Sofort-Kaufen, EUR 1,89 Versand, 30-Tag Rücknahmen, eBay-Käuferschutz
Verkäufer: diy_fans ✉️ (32.084) 98.2%, Artikelstandort: Shenzhen ,Guangdong, CN, Versand nach: AMERICAS, EUROPE, ASIA, AU, Artikelnummer: 323518074337 WiFi Wireless Smart witch Home Relais Board Delay Modul APP Smart Home.   Store Categories

Store Categories Item Description

Netzwerk Relay WIFI Module

 

Description
With ESP8266 Wifi module,4-layers board design.
Input overvoltage protection, input with TVS, when voltage exceeds 33V, 
automatic protection will operate.
Input overcurrent protection.
220V 10A relay, one normally open, one normally closed.
One way optocoupler isolation input, TVS input protection.
High-current terminals.
One output status indicator, one input status indicator.
More safe with relays PCB pin anti-climb design.
Access control server via TCP CLIENT mode
Via HTTP protocol control

Specifications:
Input voltage :DC 7-30V
Board dimension:65mm × 40mm × 20mm

 

 

DC 12V WiFi Relay Module

 

Product Introduction:
1.Size:5.2*2.8*2cm
2.Operating Voltage:DC 12V
3.Operating Current:250mA
4.Quiescent Current:90mA
5.Output Port:NO NC,mechanical switch output port
6.Port Withstand Voltage:AC 0-250V/7A;DC 0-30V/7A
7.Control Way:wifi network control,support 2G/3G/4G cellphone network
8.Operating Mode:inching
Package includede:
1*DC 12V Wifi Relais Modul Wireless Relay Switch Module Jog Mode Low Power

 

 

 

ESP8266 12V WIFI Relay

 

1. Description: The 12V ESP8266 two way WIFI relay module is based on ESP-01 as the WIFI module, with 8 bit MCU chip, and realizes the wireless control of the relay in the local area network by mobile APP through a simple configuration process.
2. Function and features:
1>. On-board high performance microprocessor STM8S103 and ESP-01 WIFI module
2>. The module has 2 modes of work
Mode 1: the mobile phone is applied directly on the WIFI module
Mode 2: the mobile phone and the WIFI module are applied to the router at the same time.
Additional function: it can also be used as a USB relay when the ESP-01 is pulled out.
3>.Transmission distance:
In an open environment, the maximum stable transmission distance is 100M when the mobile phone is mounted on the WiFi module.
 4>. When the WiFi module and mobile phone are carried on the router at the same time, the transmission distance depends on the signal strength of the router.
5>. The use of Smartcongig technology in the mobile phone on the APP ESP-01 WiFi module to complete the account and password configuration, configured username and password memory function.
6>. On-board 12V, 10A/250V AC 10A/30V DC relay, which can be continuously pulled for 100 thousand times, has diode discharge protection, short response time.
7>. On-board mode selection and real time working status indicator.
8>. Reserved UART debug interface and STM8 SWIM program download interface.
9>. Board size: 57.4*29mm.
3. Operating instructions:
Prepare the following tools before use:
12V/1A power adapter and APP “ESP Touch--Demo”
 Step 1:  the 12V/1A power adapter, the positive and negative poles of the power are connected to IN+ and IN- of the module respectively.
Step 2:  Android mobile terminal installation APP''Esp Touch--Dem ", for the first use of work mode 2 to ESP-01 module configuration WiFi account number and password.


Step 3:  Android mobile terminal to install APP "Easy TCP--20", TCP transmission tool, used to send relay control instructions. Click on "SWITCH", and then enter the relay control instructions and names and contents (instruction form HEX) by the gray blocks in the interface.


  1. Instructions for use of two operating modes and additional function:
    Operating mode 1 (the mobile phone is applied directly on the WIFI module) instructions:
    1>. Plug in the ESP-01 module, the module power up. About 4 seconds later, the green light changed from extinction to 2 seconds flashing. Description configuration completed.

    2>. AP hot spot signal sent by mobile phone connected to ESP--01 module.

    3>. Opens "EasyTCP--20" APP, and clicks "CONNECT"". After the connection is successful, the green light flashes slowly from 2 seconds to normal. Click on the gray box to send instructions to control the switch of the relay.


    Operating mode 2(the mobile phone and the WIFI module are applied to the router at the same time.) instructions:
    1>. Plug in the ESP--01 module, the module power, the light green light into slow flash, then press the S1 button to switch to the mode 2. Blue light, about 1 minutes later into 0.5S flash, indicating waiting for "Esp Touch--Demo" "APP" for its configuration WiFi account and password.

    2>. At this time, the phone line connected to the router. Open "Esp Touch- Demo" "APP", enter the router password, click "Confirm".

    3>. Waits for configuration to succeed, when the APP interface appears ESP-01 IP (such as 192.168.0.189) address, indicating that the ESP--01 module successfully connected to the router, and automatically remember the account number and password. The next entry mode 2 will automatically connect (about 20-60S to connect).


    It's important to note that the 192.168.0.189 IP address is dynamically assigned to the ESP-01 module by the router. The address may change after the next re-connection. You can see the real time IP address of the ESP-01 module in the router's device list.
        4>. Opens "Easy TCP--20" APP, and clicks "CONNECT". When the connection is successful, the green light flashes from 2 seconds to normal. Click on the gray box to send instructions to control the switch of the relay.

    Additional functions (as USB relay) instructions:
    Prepare a USB to TTL serial module. The GND, TX, and RX of the TTL module are connected to the GND, TX, and RX of the relay module respectively. Pull out the ESP-01 module, select mode 1, and turn the green light into 2S slow flash and open the serial debug software on the computer (such as SSCOM32), and choose the baud rate of 115200. Sending A0 0101 A2 in the form of sixteen (HEX) can open the relay; send the A0 0100 A1 in the form of sixteen (HEX) to close the relay. Take the relay as an example:


    5. Warm tips:

    1>. For the first time using the configuration WIFI password time would be a little bit longer (about 1 minutes). After the completion of the next boot up configuration requires only 20 seconds can be automatically connected.
    2>. If you want to replace the router, power outages can restart or press the S2 button (press the S2 key will remove the previous memory WIFI account and password). Under Mode 2 to configure ESP--01 WiFi account and password.
    3>. The router signal when the ESP--01 memory is weak or does not lead to connection interruption in the service area, the green light will be extinguished and try to connect automatically. The key in this process to the invalid state. When the green light for 2 seconds and slowly restore the connection that has flashing.
    4>. Mode 1 and mode 2 only when the green light for 2 seconds and slowly flashing or steady button can be used for the rest of the chip, self configuration or wait for the configuration process. The key is invalid.
    5>. ESP--01 and ESP--01 have no timeout mechanism, mobile phone data from more than 6 minutes will automatically disconnect TCP. Then click on the "EasyTCP--20" APP in the upper right corner of the "CONNECT" to re-establish a connection.
    6. Package list:
    1* 12V single path WiFi relay module

    Shipping :

1)All items will be shipped to your  paypal address  .Please update your latest address when you check out,and please make sure to provide us with correct,precise and detailed shipping address.

2)Most of the items will be shipped via  Hongkong Airmail/Singapore Airmail  .To US customers,we will send the package via  E-packet  .

3)All items will be shipped in  1-2 business days  (excluding Sat,Sun & Holiday) after payment received and cleared. For the long-time holiday, we'll post the info on our store and reply you automatically via emails.

4)Tax:We will do our best to help you to clear the goods,and the tax depends on each country custom.

5)If you don't receive items over 30 business days,please make sure to contact us before leaving any neutral or negative feedbacks.We'll try our best to help you solve the problem.

6)The product in our store is free shipping. But the shipping method is different based on your order.If your order is  more than $30  ,we will send the items to you with  tracking number  for free.If your order is less than $50,the registered mail fee is on your side.

We could also deliver your item via EMS,DHL or Fedex based on your requirement.
Payment :

We Only Accept Paypal on Ebay. For specific requirements, please feel free to contact us.


 

 

WiFi Relay DC5V self-lock

 

It's a Wifi wireless switch thet can connect to appliance of different types and brands.The App eWeLink enables you to control your devices easily.You can download IOS version in App Store and the Android version in Google Play.
Feature :
Size:7.1*3.1*2cm
Control Mode:By App
Transportation Mode:Wifi
System:Android/IOS
Remote Control Frequency:433MHZ
Wifi Working Frequency:2.4G 802.11 b/g/n
Load Power:<=2200W
Working Voltage:DC5V
Rated switching current:< 10A
Rated switching voltage:< 250V
Relay Life:>= 1000000 times
Insulation resistance:100M
Relay maximum pull-in time:15ms
Relay maximum release time:5ms
Operating temperature:-40℃~70℃
Working Humidity:40%~80% RH
Note:Share it using a mobile phone or 4G WIFI hotspot turn WIFI router,it also can be remote control
Download:
www.uctronics.com/download/U5222.zip
Package Including:
1*Sonoff Home WiFi Wireless Smart Switch 5V Relay Module Phone APP for IOS Android

 

 

5V-32V Self-lock WiFi Relay

 

It's a Wifi wireless switch thet can connect to appliance of different types and brands.
The App eWeLink enables you to control your devices easily.You can download IOS version in App Store 
and the Android version in Google Play.
Feature :
Control Mode:By App
Transportation Mode:Wifi
System:Android/IOS
Working Voltage:DC 5V-32V
Rated switching current:< 10A
Rated switching voltage:< 250V
Relay Life:>= 1000000 times
Insulation resistance:100M
Relay maximum pull-in time:15ms
Relay maximum release time:5ms
Operating temperature:-40℃~70℃
Working Humidity:40%~80% RH
Note:Share it using a mobile phone or 4G WIFI hotspot turn WIFI router,it also can be remote control

 

 

220V WIFI Relay Switch

 

Voltage input range: AC 85V-264V
Board size: 50X30mm
Board weight: 9G
Total weight: 37G
Module has two operating modes
Supports most of all switch-controlled devices. You can control light changes through the mobile phone APP and open the mobile phone APP outside. The status of the home appliances is clear at a glance.
Features
1. On-board original relay, which can continuously pull 100,000 times, with diode dripping protection, response time period
2. Comply with ROHS specifications
Package includes:
1 x220V WIFI Relay Module

 

 

12V 4-CH ESP8266 WIFI Relay

 

  1. Overview
    The 12V ESP8266 four-way WIFI relay module uses the ESP-01 as a WIFI module, with a mature and stable 8-bit MCU chip. It can realize the wireless control of the 4-way relay using the mobile phone APP within the LAN in a simple configuration process.
    Second, functional characteristics
    1, Onboard high performance microprocessor and ESP-01 WIFI module;
    2, the module has 2 working modes:
    Mode 1: The mobile phone is directly mounted on the WIFI module;
    Mode 2: The mobile phone and WIFI module are loaded on the router at the same time;
    Additional features: It can also be used as a USB relay when the ESP-01 is unplugged.
    3, transmission distance:
    (1) In the open environment, the maximum stable transmission distance when the mobile phone is mounted on the WIFI module is 100m;
    (2) When the WIFI module and the mobile phone are mounted on the router at the same time, the transmission distance is strong according to the signal of the router.
    Weak and certain.
    Use Smartconfig technology to complete the configuration of the ESP-01 WIFI module account and password on the mobile phone APP. The configured account and password have the power-off memory function.
    5, On-board 12V, 10A/250V AC 10A/30V DC relay, can continuously suck 100,000 times, with diode escaping protection, short response time;
    6, onboard mode selection and real-time working status indicator;
    7, with 4 optocoupler isolation, strong anti-interference ability;
    8, reserved UART debug interface and MCU program download interface.
    Third, hardware introduction and explanation
    Board size: 60*63mm
    Board function description:
    1, onboard resources:
    IN+, IN-: 12V power input;
    5V, GND, TX, RX:UART serial port pin;
    SWIM, PIN8, NRST: Reserved MCU program download port.
    Button S1: Mode switch, default is mode 1
    Press key S2: restore factory settings
    LED D1/D2/D3/D4 (red light): Relay operation indicator lighted when turned on
    LED D7 (red): Mode 1 indicator
    LED D5 (blue light): Mode 2 indicator
    LED D6 (green light): Operating status indicator, described as follows:
    (1) When it goes out, it means that it is self-configuring or losing connection with the router;
    (2) When 0.5S is flashing, it means waiting for the mobile phone APP to configure the WIFI account and password for the ESP-01 module;
    (3) When the 2S flashes slowly, it means that the configuration is completed, waiting for a TCP connection with the handset;
    (4) When it is always on, it means that it establishes a TCP connection with the handset.
    Reserved 2 jumper caps: Please plug in the bottom end when using normally (ie RX connects RX1, TX connects TX1). If you want to use USB to TTL serial port module to debug ESP-01 module, please plug it all the way to the top ( Otherwise there may be interference).
    COM1: public end;
    NC1: Normally closed, the relay is short-circuited with COM1 before the relay is closed, and it is vacant after being sucked up;
    NO1: Normally open, the relay is vacant before being sucked in, and shorted to COM1 after sucking.
    COM2: public end;
    NC2: Normally closed, the relay is shorted to COM2 before the relay is closed, and it is vacant after being sucked up;
    NO2: Normally open, the relay is suspended before closing, and shorted to COM2 after pull-in.
    COM3: public
    NC3: Normally closed, short-circuited with COM3 before the relay is closed, and it is vacant after suction;
    NO3: Normally open, the relay is vacant before being sucked up, and shorted to COM3 after sucking.
    COM4: public
    NC4: Normally closed, shorted to COM4 before the relay is closed, and it is left open after suction.
    NO4: Normally open, the relay is left unconnected before it is sucked in, and it is short-circuited with COM4 after pull-in.
    Relay control instructions (hex hexadecimal):
    Open the first relay: A0 01 01 A2
    Turn off the first relay: A0 01 00 A1
    Open the second relay: A0 02 01 A3
    Close the second relay: A0 02 00 A2
    Open the third relay: A0 03 01 A4
    Turn off the third relay: A0 03 00 A3
    Open the fourth relay: A0 04 01 A5
    Turn off the fourth relay: A0 04 00 A4

 

 

  • way Relay WiFi DC5-32V

Description :
It's a Wifi wireless switch thet can connect to appliance of different types and brands.The App eWeLink enables you to control your devices easily.You can download IOS version in App Store and the Android version in Google Play.
Feature :
4-Way Control with 4*10A Realy
Control Mode:By App
Transportation Mode:Wifi
System:Android/IOS
Remote Control Frequency:433MHZ
Wifi Working Frequency:2.4G 802.11 b/g/n
Load Power:<=2200W
Working Voltage:DC5V-32V
Rated switching current:< 10A
Rated switching voltage:< 250V
Relay Life:>= 1000000 times
Insulation resistance:100M
Relay maximum pull-in time:15ms
Relay maximum release time:5ms
Operating temperature:-40℃~70℃
Working Humidity:40%~80% RH
Mode : Self-locking , interlock , jog

Pls buy with confidence

We are spending more than  6 years in eBay business, we promise, we are an Honest and Hard-working seller, we do love our Job, we already try our best to provide best services.
 
Hope you enjoy your purchase in our store
 
 If any questions and ideas, just feel free to tell us ,we are here for you or will be back to you within 24 hours.
 
 Our reputation for excellent customer service has been built over 5 years of trading by providing great value and support to all of our customers. With tens of thousands of products shipped,we understand the things that matter to you, the buyer.

Shipping
  • We ship to Paypal registered address only!

  • Items will be shipped within 24 hours after payment received.

  • For Items that shipped from China is send by Airmail, it normally take 15-35 days for delivery

  • For Items that shipped from UK warehouse is send by Royal Mail
    , it normally take 2-5 days for delivery, and no tax to The European Union!!!

  • If you do not receive your item after 35 days. please contact us immediately for further assistance. We will be responsible for any damages or losses incurred in the shipping process.

  • Import duties, value added taxes and any other charges are NOT included in the item price or shipping costs. As an eligible importer,you are responsible for any reasonable tax or any other importation fees.

Payment
  • W e accept paypal only !
  •  
  • Payment must be received in 5 business days .
  • Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
  • Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
About us
  • Specialized in electronic components and moudels.
  • Real store, Goods in stock.
  • Competive price. Good quality
We have more than 8 years experience in international business.have a wealth of experience in shipment. and we work with reliableshipment company, can get good price from DHL in Hongkong. customer service

1. We take care of all requirements from every single valued customer, like you. Therefore, we do our best to control the quality of each item before sending.

2. In very rare case, if the product is found faulty, please contact us for return or refund.

3. In addition, we offer 30 days unconditional Refund Warranty and 1 Year Manufacturer Warranty.

4. We must be informed if you do not like the device within 7 days upon receiving the item and we will give you a returned merchandise authorization number (RMA). Without (RMA), the buyer will be responsible for any loss of return.

5. All returns must include all original items undamaged, in re-saleable condition, all original packaging including manuals, warranty forms, etc.

6. As we are selling all items on eBay from factory at lowest price, we are unable to refund you shipping and handling costs. Buyer is responsible for shipping costs incurred shipping products back.

go to my store

 


Am 17.10.19 hat der Verkäufer die folgenden Angaben hinzugefügt:

 


Am 17.08.2023 hat der Verkäufer die folgenden Angaben hinzugefügt:

  • Condition: Neu
  • select: Netzwerk Relay WIFI Module
  • Brand: GCSUPERMARKET
  • Marke: Markenlos
  • Model: Relay WIFI Module
  • Type: Netzwerk Relay
  • Model1: Self-lock WiFi Relay
  • Model2: Smart Home Automation
  • Type 1: ESP8266 Relay
  • Type 2: Relay Switch Module
  • Type 3: APP Smart Home
  • Model3: Sonoff WiFi

PicClick Insights - WiFi Wireless Smart witch Home Relais Board Delay Modul APP Smart Home PicClick Exklusiv

  •  Popularität - 90 Beobachter, 0.0 neue Beobachter pro Tag, 1.981 days for sale on eBay. Super hohe beobachtend. 23 verkauft, 5 verfügbar.
  •  Bestpreis -
  •  Verkäufer - 32.084+ artikel verkauft. 1.8% negativ bewertungen. Großer Verkäufer mit sehr gutem positivem Rückgespräch und über 50 Bewertungen.

Die Leute Mochten Auch PicClick Exklusiv