【DE】4Axis Nema34 12N.m Closed Loop Servo Motor Driver CNC Offline Controller Kit

EUR 818,72 Sofort-Kaufen, Kostenloser Versand, eBay-Käuferschutz
Verkäufer: powace08 ✉️ (4.091) 99.3%, Artikelstandort: Frankfurt, DE, Versand nach: EUROPEAN_UNION, GB, Artikelnummer: 275571593901 【DE】4Axis Nema34 12N.m Closed Loop Servo Motor Driver CNC Offline Controller Kit.

【DE】Nema34 12N.m Closed Loop Servo Motor Driver 4 Axis CNC Motion Controller Kit

We will Ship from Germany warehouse  to Below Europe Countries

Austria Belgium Bulgaria

Czech Republic

Croatia

Denmark Estonia
Finland France Germany Greece Hungary Ireland Italy
Latvia Lithuania Luxembourg Netherlands Poland Portugal Romania
Slovakia Slovenia Spain Sweden UK Malta  

Package included:

  • 3x Nema34 12N.m Closed loop Servo Motor 156mm 6A

  • 3x 2HSS86 Servo Driver

  • 3x 3m extension wire

  • 1 x 4 Axis Motion Offline Controller DDCSV3.1

  • 1 x Handwheel MPG with emergency stop
  • 1 x 4GB USB Flash drive

  • 1 x USB Extension Cable+Accessories

  • User manual
                              100% Brand New and High Quality!!!

DDCSV3.1 Offline Standalone Motion Controller

Introduction

  • Aims to combine high quality and high reliability with affordability. The DDCS is a 4 axis motion controller for stepper and servo systems. DDCS V3.1 is updated from DDCS V2.1 on software and hardware.We are very proud of this product,it combines great power with a tiny footprint and is easy to use.
  • The highest output pulse per axis is 500KHz. This provides high control precision for stepper motors and servo motors.
  • The DDCS numerical control system adopts the ARM+FPGA design framework. The ARM can finish the part of human-computer interface and code analysis and the FPGA can finish the part of underlying algorithm and control pulse generate, with the reasonable design, reliable control and easy operation. Reliable control and easy operation.
  • The internal operating system is Linux based. The panel layout structure of the DDCS V3.1 is very rational to save space. All operations are controlled by only 17 keys and a comprehensive G code set is supported. The DDCS can be used for many styles and types of CNC machines. Lathes, Routers, Pick and Place and Mills are just a few examples. The DDCS operates as a Stand Alone system without the need of a computer. With high precision, accuracy and reliability. The interface, even very comprehensive, can be learned in a very short time.
  • DDCSV3.1 is the 4 axis motion controller.The control period of each position is only 4 milliseconds, with a high control precision. The highest uniaxial output pulse is 500KHz and the pulse width can be adjusted. It supports the common stepper motor and servo motor.
  • The panel layout structure of DDCSV3.1 is rational. The CNC MOTION SYSTEM Controller can be finished only by 17 keys and it supports the FANUC with high universality to be compatible with G code set.

DDCS V3.1 Brief technical feature:

  • 1) 16 photoelectric isolated digital inputs,3 photoelectric isolated digital outputs;
  • 2) 3.1 Version enhenced Algorithm,support soft interpolation,fixed arc interpolation bug of the old version;
  • 3) Analog spindle control 0-10V spindle control (can be modified as PWM output);
  • 4) 3-4 axis motor Control.Differential Pulse and direction output signal,Max.500Khz per axis;
  • 5) ARM9 main control chip,FPGA core algorithm chip;
  • 6) 5 inches TFT screen, resolution ratio: 480x272,17 operation keys;
  • 7) The Power Supply for the controller is 24VDC, minimum Current is 0.5A;
  • 8) The Power Supply for IO Port is 24VDC,minimum current is 0.5A;By the IO power supply,system already supply the power for IO ports.So no need the external power supply for IO port anymore;
  • 9) USB flash disk support for G code file input,no size limited of the G-code file ;
  • 10) Support standard MPG;
  • 11) Jog function for each axis (continuous, step, defined distance);Customer can define the distance;
  • 12) Support the operation of quickly specify the running position;
  • 13) Support for “Power Cut” recovery. Data is automatically saved;
  • 14) The controller only support NPN type limited switch.

The Limit wiring at X++ direction with mechanical limited switch

  • PIN6(YL++),PIN23(XL++),PIN25(YL--),PIN5(XL--),PIN28(AL--),PIN9(AL++),PIN8(ZL--),PIN26(ZL++) are the Limit ports.

Power Supply Input

  • DDCS V3.1 needs two power supplies,Main power is for system,IO Port is for Input and Output ports.
  • Both power supply is 24VDC,current is not less then 1A.
  • In the Main port interface,the marked 24V and GND is the main power input ports;the COM+ and COM- is the IO power input ports.
  • Only when the two power supplies are connected correctly the controller can be work properly.
  • Becasue of the IO power,the controller system can supply power to all the IO ports,the IO ports is no need of the external power any more,for example,the relay.

Spindle control output

  • PIN3(M8),PIN22(M10),PIN2(VSO) and PIN21(M3) is for spindle control output.
  • The spindle control output terminal offers connections for Start and Stop of the Spindle (M3/M5), Start/Stop of Cooling (M8/M9) and Start/Stop of Lubrication (M10/M11). These three output terminals are signals open to ground.
  • The highest electric current can be absorbed is 50mA.
  • The speed controlling output terminal can output 0-10V.
  • It can adjust the speed of the spindle motor by sending the voltage between 0 and 10V to the VFD according the the Spindle Speed Setting.
  • Controlling the speed of a spindle with a VFD (variable frequency drive) only needs the Start/Stop signal and the 0-10V signal to control the frequency.
  • PIN3(M8),PIN22(M10) and PIN21(M3) is also can be used for OUTPUT ports.For example,it can be used for a Relay output port.

Stepper/Servo Control Output

  • AD- means the Direction signal - output for A axis
  • AD+ means the Direction signal + output for A axis
  • AP- means the Pulse signal - output
  • AP+ means the Pluse Signal + output.
  • The Pulse and Direction signal output voltage is ±5V.
  • PIN 18(AD-),PIN 36 (AD+),PIN 17 (AP-),PIN 35 (AP+) is A Axis Control Output Pins;
  • PIN 16 (ZD-),PIN 34 (ZD+),PIN 15 (ZP-),PIN 33 (ZP+) is Z Axis Control Output Pins;
  • PIN 14 (YD-),PIN 32 (YD+),PIN 13 (YP-),PIN 31 (YP+) is Y Axis Control Output Pins;
  • PIN 12 (XD-),PIN 30 (XD+),PIN 11 (XP-),PIN 29 (XP+) is X Axis Control Output Pins.

The Limit wiring at X++ direction with 3-line proximity switch

  • Limit wiring method for X++direction of 3-wire proximity switch.

The Probe Wiring

  • PIN10(AHOME),PIN27(ZHOME),PIN7(YHOME),PIN24(XHOME) are the Home Ports.
  • PIN4(PROBE) is the Probe Port

Outward Appearance,Structure and Size

  • The DDCS V3.1 is a small box that can fit in a window of a small control box or control cabinet.
  • To mount the unit in an equipment c abinet, cut the hole182.5mm*59mm
  • The front of the product is 17 user keys and 4.3" and 480*272 LSD (Liquid Crystal Display), and the reverse side is input signal, spindle control, stepper/ servo control, MPG and other four sets of interfaces as well as USB interface and power interface.
  • The front panel is 191mm*128mm*5mm
  • The main body is 191mm*128mm*37mm
  • The back panel is 175mm*110mm
  • Control System Unit is compatible with Metric Units and Imperial Units;
  • MPG and extended Keyboard can also control and edit the controller system
  • 3 kinds Probing Modes:Fixed Position of tool sensor,Floating Position of the tool
  • Added a lot of parameters,Optimal Design and algorithm
  • Cited the new circuit design and metal box,which can avoid the noise a lot

4 Axis MPG Pendant Handwheel with Emergency stop with 15-pin plug

The CNC 4 Axis handheld controller MPG Pendant with x1, x10, x100 selectable, You are bidding one complete unit of the MPG pendant with Emergency stop for 4 axis CNC machine,it equipped with our popular machined MPG unit with 4 axis and scale selector, LED indicator also send feedback from the CNC machine to user about the status of the unit.

Plug and play, this MPG comes with a 15-pin plug, which can be directly connected to the 15-pin socket of the controller MPG.

  • x1, x10, x100 switch
  • X,Y,Z,4th axis selector switch
  • LED indicator
  • With Emergency stop
  • High quality professional chassis
  • Extendable high quality shielded cable cord
  • Magnetic base holder can place anywhere on the machine steel surface
  • Required 5V+, 150mA, power for MPG
  • Resolution:100PPR
  • Supply Current:≤80mA
  • Output Voltage:≥2.5V and ≤0.4V
  • Fall/Rise time:≤5ns(typ)
  • Response Frequency:0-10KHz

Top About this item Similar Questions Product information Reviews

Nema34 12N.m Closed Loop Servo Stepper Motor & 2HSS86 Servo Driver CNC Kit

Nema34 Closed loop servo motor 12N.m 86x86x156mm

Specifications

  • Size:86x86x156mm
  • Current :6.0A
  • Phase:2
  • Step Angle(degrees):1.8 degree
  • Lead wire:4pcs
  • Holding Torque:12N.m (1700oz-in)
  • Resistance:0.44±10%Ω
  • Inductance:3.7±20%mH
  • Insulation resistance:100MOhm(500V DC)
  • Insulation Class:B

Overview

  • This is the nema 34 series hybrid stepper servo kit. The 2HSS86 driver adopts new generation 32 bit DSP and vector control technology, which can avoid the stepper motor losing steps and ensure the accuracy of the motor.
  • The torque reducing is much lower than open loop stepper motor when it is at higher speed. The high speed performance and torque are enhanced in a great extent. Meanwhile the current control is based on the load, that can reduce the motor temperature rising effectively, then can extend the using life of the motor.
  • The build-in place in position and alarm output signal can help the upper monitor to monitor and control. The function of position ultra difference alarm can ensure the machine work safely. The closed loop system is an ideal improvement and a good replacement of open loop system,besides that,it also have some function of AC servo motors.

2HSS86 Driver

  • Voltage range: AC24-70V or DC30-100V
  • Peak current :Peak 8.0A
  • Logic input current:7-20mA
  • Frequency:0-200KHz
  • Suitable motor: 86HSE156, 86HSE118, 86HSE82
  • Encoder lines:1000
  • Insulation resistance:>=500MΩ
  • Operating temprature:0~50℃
  • Operating humidit:40~90%RH
  • Virbration:5.9m/s2Max

1.2.1 Stepper motor closed loop system, never lose step.

1.2.2 Improve motor output torque and working speed.

1.2.3 Automatic current adjustment based on load

1.2.4 Suitable for all mechanical load conditions (include low rigidity belt pulley and wheel), no need to adjust gain parameter.

1.2.5 Drive nema 34 series closed loop stepper motor.

1.2.6 Pulses response frequency can reach 200KHZ

1.2.7 16 kinds microsteps choice, highest 51200microsteps/rev.

  • Over-current,over-voltage and position ultra difference protection function.
  • Closed loop stepper system can be applied to all kinds small automatic equipment and instrument. Such as engraving machine, special industrial sewing machine, stripping machine, marking machine, cutting machine, graph plotter, cnc machine, automatic assembly equipment and so on

Wiring diagram

Feedback: We maintain hightest buyer ratings > Positive Feedback will be much appreciated from you. > Any dissatisfaction,please contact us immediately! > Please do not leave neutral or negative feedback before we help you out. Returns: > Defect: We will fully refund or send you a new replacement,please contact and return within 30 days. > Dissatisfaction: Please contact within 3 days, we will fully refund, after got your returned goods. > Missing parts/Q'ty: Please contact us immediately,for a new package arranged,or a partial refund issued. Contact us: > If have any question, Please contact us by ebay message before leaving neutral, negative feedback or open any dispute, we will reply within 24hours, ensure that help you solve the problem, make you satisfied.
  • Condition: Neu
  • Phase: 2
  • Holding torque: 12N.m
  • Angebotspaket: Nein
  • Size: 86X86X156mm
  • Driver: HSS86 2-Phase Hybrid Stepper Servo Driver
  • Lead wire: 4pcs
  • Insulation resistance: 100MOhm(500V)
  • Controller: 4 axis CNC Motion controller
  • Insulation class: B
  • Step Angle(degrees): 1.8
  • Ausländisches Produkt: Nein
  • Marke: RATTM MOTOR
  • Type: Hybrid
  • Modifizierter Artikel: Nein
  • Voltage: AC24~70V or DC30~100V
  • Model: 86HSE156 / HSS86
  • Frequency: 0~200KHz
  • Current: 6A

PicClick Insights - 【DE】4Axis Nema34 12N.m Closed Loop Servo Motor Driver CNC Offline Controller Kit PicClick Exklusiv

  •  Popularität - 14 Beobachter, 0.0 neue Beobachter pro Tag, 477 days for sale on eBay. Super hohe beobachtend. 2 verkauft, 4 verfügbar.
  •  Bestpreis -
  •  Verkäufer - 4.091+ artikel verkauft. 0.7% negativ bewertungen. Großer Verkäufer mit sehr gutem positivem Rückgespräch und über 50 Bewertungen.

Die Leute Mochten Auch PicClick Exklusiv