An airbrush is an air-operated tool that sprays various media. You can use the air brushes to create a wide variety of artistic works on nails, models, cake, food, T-shirts, canvas and a multitude of other surfaces. They work in watercolor and other paints, in dyes and inks and even in makeup foundation.
|
|
|
---|---|---|
0.3mm Needle & Nozzle combinationThis gravity feed airbrush with 0.3mm needle and nozzle combination allows for finer control of paint flow and less overspray, which increases your ability to produce detailed work and doesn't waste a lot of paint. |
Dual-action FunctionThis dual action airbrush does not need a switch,just press the trigger to work, air will be sprayed, move the trigger back, the liquid will be sprayed, you can freely control the liquid output. |
Spray Adjustment KnobAdjust the air flow regulator to control spray amount.It is easy and labor-saving for you to absorb you in your professional work. |
|
|
|
---|---|---|
USB RechageableUSB charging time:1hour,working time:1hour.(Charge is Not include)The indicator light is red when charging, and turns green when fully charged. |
Gravity Feed & Internal MixThe internal mix offers the most consistent, smooth result because the atomization of the paint is better with this method. This gives you a well-balanced distribution of paint, which will allow for greater control. |
Package Contents1 x Portable Airbrush 1 x Wrench 1 x Dropper 5 x Cleaning Brushes 1 x Charging Cable 1 x User Manual |
1. Please test airbrush kit with clear water before using pigment or paint to make sure that the airbrush is not clogged to spray normally.
2. Please use the water-based makeup foundations instead of oil based makeup foundations, you need to use makeup foundations made for airbrush otherwise it will clog the nozzle. It is recommended to use the Professional Airbrush Cosmetic Makeup Foundation.
3. If the airbrush is not able to spray liquid, it may also be that the fluid control knob is too tight, please adjust the tail screw. Or it may be that the nozzle is blocked. Please remove and clean the nozzle. Please refill cup with alcohol or cleaning solvent, then block the needle cover with a finger and spray. The air flows backward into nozzle to clean the paints remained the airbrush. Please repeat it 2-3 times. After that, please wipe off the residual solvent. Dry the airbrush to avoid stains or rust, convenient for next use.
4. If the airbrush compressor can not be charged and does not work. Maybe the battery has been exhausted during use. The battery can not be started and recharged by itself, so the air compressor can only be replaced by us.
5. After continuous use of 30 minutes, the air compressor should be turned off for a few minutes to cool it. After that, the air compressor can be used again and this extends its life.
6. When using acrylic paint, please dilute with distilled water or with good quality commercial thinners specifically made for acrylic paints
7. The nozzle of this airbrush gun is only 0.3mm, so it can only spray watercolor pigments, inks and properly diluted paints. If the paint and liquid are too thick, please properly dilute it with water or thinner.(Note: The concentration of paint and thinner cannot be adjusted higher than milk)
8. After each use of this airbrush, please use clean water or cleaning solvent to clean the fluid cup and the nozzle thoroughly in time and do not let the paint become dry, so as to avoid nozzle clogging or uneven spraying.
Package Includes:
1 set paint gun tools