Jura Capresso Nespresso Service Tool Bit 416 Stainless Steel for Magnetic Handle

CHF 14.92 Sofort-Kaufen 1d 11h, CHF 5.78 Versand, 30-Day Rücknahmen, Kostenloser PayPal-Käuferschutz in unbegrenzter Höhe.

Verkäufer: juracapressodoctor (4,123) 100%, Artikelstandort: Wilmington, North Carolina, Versand nach: Worldwide, Artikelnummer: 122004997231 Made in USA - The ORIGINAL in 416 STAINLESS STEEL! This listing is for a stanless steel tool bit that will open the special oval head screws used in most Jura, Jura Capresso, Nespresso, Krups and AEG machines. This bit is manufactured from 416 Stainless Steel. 416 SS has the characteristic of being magnetic and stays put in a driver handle with magnet unlike our 303 SS tool here: https://www.ebay.com/itm/121114568064. (This is why the 303 SS comes with a key ring and the 416 does not). NOTE: This is the same bit that we include with a magnetic driver handle here: http://www.ebay.com/itm/122258550980. STANDARD 1/4" (6.35mm) BIT. US standard dimension for perfect fit in a standard 1/4" bit driver. We use US standard 1/4" hex stock and not European 6.00mm hex stock. The bit is manufactured from 416 Stainless Steel, which will stick well to a magnet unlike 303 SS. DURABLE! The tool is precision machined from 416 Stainless Steel. It will not rust or stain,and there's no plating that can flake. Stainless steel is stronger and more durable than regular carbon steel, which often requires plating to achieve sufficient strength. Precision Fit! The tool fits oval head bolts with a head size of approximately 3.9x3.3mm. It's worth noting that the head size varies slightly between espresso maker production batches and models. Throughout the years we have perfected the size to ensure that the tool will work for most machines. If you run into a situation were the tool does not grab the screw head, no problem! Please let us know, and we'll make it right! Quality Control TESTED! Every tool sold by us has been manually and individually tested to a reference screw and is guaranteed to have the correct reference size. Unfortunately this does not guarantee that the screws in your machine are the expected size due to variations between production batches and the simple fact that the screw heads definitely are not precision manufactured. If you run into a situation were the tool does not grab the screw head, no problem! Please let us know, and we'll make it right! These bits are designed by us and custom manufactured for us by a professional CNC shop in USA. The tool is machined in stainless steel with very good precision and a tight fit that lets you remove even the most difficult screws without a sweat. The stainless steel will last a long time even in daily use in a repair shop. The bit will fit the proprietary oval head security screws in the following machines: Jura-Capresso: A1, A5, A7, A9, C5, C50, C55, C65, C70, C75, C9, C90, D6, E5, E8, E9, E10, E25, E30, E40, E45, E50, E55, E6, E60, E65, E70, E74, E75, E80, E85, ENA3, ENA4, ENA5, ENA7, ENA9, ENA Micro 1, ENA Micro 5, ENA Micro 8, ENA Micro 9, ENA Micro 90, ENA Micro Easy, F5, F50, F60, F70, F90, F7, F9, F900, Giga 5, Giga X3, Giga X7, Giga X8, Giga X9, XF50, XF70, S50, S55, S70, S75, S85, S90, S95, S7, S8, S9, J5, J6, J9, Z5, Z6, Z7, Z8, Z9, X5, X6, X7, X9, X30, X70, X90, X95, Ultra, Cappuccinatore, M30, Scala, Scala Vario, Evolution, 201, 300, 401, 500, 601, 801, 2000, 3000, 4000, 5000, 6000 Capresso: C1000, C1300, C1500, C2000, C3000 AEG Cafamosa: CF 80, CF 81, CF 85, CF 90, CF95, CF 100, CF 120, CF 200, CF 300, CF 400, CF 500 Krups: Orchestro, Siciliana, Toscana, and all Nespresso machines. Please beware that the tool does not fit the 5.8x4.8mm oval head bolts found in Krups drip coffee makers! Franke: Saphira In short, it will fit all Jura-machines. We don't know of any Jura machine that it does not fit. As for other brands, please check list above or contact us. Traditionally the screws are obvious and appear as black "rivets". However, on many of the more recent models Jura has hidden the screws which makes it less obvious how to disassemble the machines. You may find this additional info helpful: J-series, Z-series, and X5: There are two hidden security screws behind the Jura logo in the back. Turn the logo an eight of a turn clockwise (Z-series/X5) or counter-clockwise (J-series) to release it and you will find the screws. ENA-series: These machines are secured with a locking mechanism. There is a security screw behind the Jura logo in the back. Turn the logo to counter-clockwise release it and you will find the screw. Remove the screw and then push the gray plate upwards to release the locking mechanism in the back. Likewise, there's another oval head screw in the front that will be visible when you pull out the tray. The locking mechanism in the front needs to be pulled down (in contrast to the one in the rear that moves upwards). 100% satisfaction guaranteed! If you're not happy we will refund your money! Shipping: In most cases your item will be shipped the same day if payment is received by noon eastern time (12 PM EST, 16:00 GMT Monday-Saturday). Items paid after this cutoff time may be shipped the next business day. International customers: Please note that the default shipping is by First Class Mail (Economy Mail). The US Postal Service does not guarantee timely delivery for this mail class, and although most shipments arrive within 7~14 days (14~21 to Italy, 14~30 to Mexico), on some occasions it has taken up to 30 days for international First Class Mail shipments to reach their destination. Condition: New, Type: Brew Group

PicClick Insights PicClick Exklusiv
  •  Popularität - 5,287 blicke, 4.8 views per day, 1,109 days on eBay. Super hohe von blicke. 48 verkauft, 39 verfügbar.
  •  Preis -
  •  Verkäufer - 4,123+ artikel verkauft. 0% negativ bewertungen. Großer Verkäufer mit sehr gutem positivem Rückgespräch und über 50 Bewertungen.
Ähnliche Artikel Items