Dichtung Fix Kopfdichtung Reparatur Diy Dichtmittelflüssigkeit Überhitzung Geblasener Zylinder

EUR 27,49 Sofort-Kaufen, EUR 34,67 Versand, 30-Tag Rücknahmen, eBay-Käuferschutz
Verkäufer: mk1classiccarparts ✉️ (16.646) 100%, Artikelstandort: Bromsgrove, GB, Versand nach: EUROPE und viele andere Länder, Artikelnummer: 263971489071 DICHTUNG FIX KOPFDICHTUNG REPARATUR DIY DICHTMITTELFLÜSSIGKEIT ÜBERHITZUNG GEBLASENER ZYLINDER.

Elliots Blown Head Gasket Engine Block Repair Fluid

Here we have 1 x 500ml Bottles Gasket Fix

1 Bottle treats  Vehicles  with Engines up to 2000cc 

Please Read The Terms & Conditions at the Bottom of the Description In Full Before Clicking Buy Now, We Have Sold Hundreds Of These and it Has An Excellent Success Rate But it Cannot Perform Miracles if Your Engine Is Too Damaged To Begin With, There Is No Guarantee so please dont buy if you dont agree as we value our feedback and would rather be honest up front 

The revolutionary product that actually repairs broken gaskets, cracked head gaskets and repairs warped heads. 

Save hundreds if not thousands on costly repairs. 

Please Read The Terms & Conditions Below Before Ordering

Fix repairs your broken or cracked head gasket quickly and permanently.

Gasket Fix is not a temporary solution!

ONE BOTTLE OF GASKET FIX TREATS ENGINE UP TO 2LTR'S SO YOU WILL NEED  2 BOTTLES TO DO ENGINES UP TO 4LTRS

How does Gasket Fix work?

Gasket fix is a blend of cutting edge polymer science. It is a clean liquid that does not contain any iron fillings, fiber glass pieces or other types of solid additives. 

These could clog up and even damage an engine. Elliots do not use fillers. 

Simply pour Gasket Fix into your cold radiator and run the engine for around an hour. 

As the engine heats up it, the scientific blend in Gasket Fix will penetrate cracked and or broken head gaskets and will permanently seal the holes. The heat from the engine will start a reaction with the Gasket Fix creating a super bond 

How to use Gasket Fix in 3 simple steps!!

1. With a cold engine, open the radiator cap and pour in Elliott’s gasket fix. Replace the radiator cap.

2. Start the engine, then turn the heater and fan on full. Let the engine run for 60 minutes. After 60 minutes, let the engine completely cool and top up the radiator with coolant and water. 

3. Drive your car as usual, gasket fix will continue to work as you are driving.

Important: If you are putting Gasket Fix into your car through an expansion tank, make sure that there is enough room in your cooling system for the gasketfix to penetrate your system otherwise the Gasket Fix will just site in the expansion tank.

For optimum results:- If you have tried inferior products flush your cooling system with water after disconnecting bottom radiator hose. Do not use a flushing agent.

Additional Gasket Fix Directions if you are experiencing back pressure or bubbling:

These directions are for people that have a lot of back pressure building in the cooling system, usually shown as bubbling in the header tank or air forcing past the coolant cap.

- Locate the cylinder causing the bubbling in the overflow tank or backpressure. (Remove plugs one at a time till bubbling stops.

- Before starting the engine, remove the spark plug or injector from the cylinder that was causing the bubbling in the overflow tank or back pressure. If accessible, remove injector wire from that cylinder. This will limit the amount of unburned fuel going into the combustion chamber.

- If you cannot find the spark plug that is missing, run the engine with the coolant level down to the top of the radiator core and with the radiator cap off or leave the expansion cap off the expansion bottle with water only just visible.

- Make sure to run the engine up to temperature with the spark plug /Injector out and for the one final time with the spark plug/injector back in place.


Gasket Fix Frequently asked Questions

Q) What is the background of the Gasket Fix™ product?

A) The Product was developed in Germany and has been through some very strict testing an independent laboratory. If used properly it has a 99% success rate.

Q) What is in Gasket Fix™?

A) Gasket Fix™ contains a mix of proprietary chemicals that have been blended in such a way that they form a bond when heated.

Q) Will Gasket Fix™ block my engines cooling system?

A) Unlike other brands, Elliott's does not use fibers or particles that can damage or clog an engines cooling system. Our product is a clear liquid.

Q) Can Gasket fix be used with anti-freeze?

A) Gasket fix works well with antifreeze.

Q) How long will Gasket Fix last?

A) Gasket Fix™ has been designed to be a permanent fix.

Q) Are there some problems that Gasket Fix™ will not fix?

A) Gasket Fix™ will not seal leaks in hoses, seals, water pumps, or extremely large cracks in the head or block resulting in the vehicle not starting. If it does not run Elliott’s Gasket Fix can not work as it relies on temperature.

Q) What do I do if I have used an inferior or other product making similar claims?

A) If you have used an inferior product you must flush the radiator with water to clean it before using gasket fix.

Q) What precautions should I take with Gasket Fix™?

A) Gasket Fix™ should be kept out of reach of children. Avoid eye or skin contact. If eyes or skin become irritated with Elliott’s Gasket Fix™, rinse with cold water immediately. If swallowed, do not induce vomiting. Call a doctor immediately.

Q) Do I need to drain the coolant system before using Gasket Fix?

A) You need clean coolant in the system, if yours is old or full of oil you must change it first then add Elliott’s Gasket Fix.

Q) What if I have oil leaking ?

A) Elliott’s Gasket Fix will not fix oil leaks, only coolant related leaks on the head gasket.

Q) Do I need to flush the coolant if I am using Gasket Fix a second time as it initially did not work?

A) If the coolant was fresh and clean add Elliott’s Gasket Fix, if dirty flush it

first.

Terms and Conditions - Please Read in Full

We have sold hundreds of bottles and the product has an excellent success rate but if your engine is too damaged to begin with nothing out there will fix it

We always recommend that you get a pressure test and mechanics advise on if a product like this is worth using

If the Gasket fix works then you will save hundreds, there is no guarantee so if the product does not work nothing will and you will need an engine rebuild, there is no refund or returns on used items if you do not agree please do not buy, there is no miracle cure if your engine is too damaged

  • Condition: Neu
  • Brand: Elliots UK
  • Type: Sealant
  • Unit Type: Unit
  • Volume: 500 mL
  • Manufacturer Part Number: VW65HGS500
  • Country/Region of Manufacture: United Kingdom
  • Unit Quantity: 1
  • Reference OE/OEM Number: Head Gasket Sealant

PicClick Insights - Dichtung Fix Kopfdichtung Reparatur Diy Dichtmittelflüssigkeit Überhitzung Geblasener Zylinder PicClick Exklusiv

  •  Popularität - 34 Beobachter, 0.0 neue Beobachter pro Tag, 2.004 days for sale on eBay. Super hohe beobachtend. 124 verkauft, 10 verfügbar.
  •  Bestpreis -
  •  Verkäufer - 16.646+ artikel verkauft. 0% negativ bewertungen. Großer Verkäufer mit sehr gutem positivem Rückgespräch und über 50 Bewertungen.

Die Leute Mochten Auch PicClick Exklusiv