GENUINE Siemens Deka 60lb 630cc EV1 Long Injectors Set of 4 FORD RS COSWORTH

CHF 238.43 Sofort-Kaufen 27d 7h, CHF 15.65 Versand, 14-Day Rücknahmen, Kostenloser PayPal-Käuferschutz in unbegrenzter Höhe.

Verkäufer: sas_auto_customs (3,397) 100%, Artikelstandort: Truro, Versand nach: Worldwide, Artikelnummer: 321042013340 Siemens DEKA IV Mototron 60lb/hour High Impedance Injectors ( Long Style ) with EV1 ConnectorSET OF 4Genunine Siemens Deka InjectorsWe are a huge Siemens Deka Dealer and supply throughout Europe and the UK, including BTCC/race teams and big tuning/sports car names We are so confident with these injectors, we use them on our tuning and offer a 2 YEAR WARRANTY!Please be aware of non genuine injectors or sellers claiming theirs are matchedAll Siemens Deka injectors come with a unique serial number, part number and letter codingIf you have bought a set from another supplier and in doubt about their authentisity, we are happy to check them out for you.We also accept returns60lb/h Siemens Deka 4 Mototron High Impedance (Long Style) EV1 Connector – FI114961Genuine Siemens / Mototron DEKA IV ( DEKA 4 ) High Impedance InjectorsThese injectors flow 60 lbs/hr at 43.5 PSI ( 3 BAR ) and up to 85 lbs/hr at 87 PSI! In addition, these units are high-impedance. Despite the high flow rate, they are linear and controllable at low pulse widths and have been used in ULEV applications! This allows you to use a larger injector than normally possible without hurting idle and low speed driveability. Adding to the flexibility of application, these units are high-impedance; making them compatible with most ECUs, while delivering the most flow available in a High-Impedance injector.These injectors are able to function at high fuel pressures and don’t exhibit the high fuel pressure handling problems found with many other high flow high-impedance injectors. This makes these injectors very well suited to turbocharged and supercharged applications that see high fuel system pressures.Engine performance and running quality are enhanced through the optimized spray pattern. Unlike competitors “pencil stream” high flow injectors; these High Flow injectors utilize a multi-orifice tip providing a true 30 degree spray pattern for improved mixture preparation. This results in lower BSFC and better idle quality than many injectors with less flow.The EV1 injector connector can be found on many older and late-model OEM applications such as the GM TBI, TPI, LT1, LT4, LS1, some LS2, some LS6 and most European applications. We also offer the same injector with the EV6 / USCAR connector as Part Number MOTR-04557. Buy only the injector with the connector you need and eliminate the need for in-line adapters or having to change the factory connectors!Features: Genuine, reliable Siemens Injectors Excellent response characteristics Robust Design High Impedance Low Impedance performance characteristics with High Impedance CompatibilitySpecifications: Coil Resistance: 12.5 Ohms / High Impedance / High-Z (No ECM driver modifications required) Static Flow Rate @ 43.5PSI ( 300kPa ) w/Gas: 60 lb/hr = 630 cc/min = 453 g/min Static Flow Rate @ 87PSI ( 600kPa ) w/Gas: 85.7 lb/hr = 900 cc/min = 648 g/min Gain: 0.11ms/mg Offset: 0.055ms Turn on time @ 14VDC: 1.14ms Turn off time: 0.85ms @ 600KPa Connector: Bosch EV1 Series: DEKA 4 ( DEKA IV ) Orifice Type: Multi-orifice Spray Pattern: 30 Degree Spray Cone Factory fitted with Viton upper and lower o-ringsEquivalent Part Numbers: Siemens FI114961 or 107-961 ( 107961 ) Mototron INJ-GAS-006 ( L107) Accel 74620L MSD / Edge 2030 Condition: New, Brand: Siemens, Manufacturer Part Number: 107961, Part Manufacturer: Siemens

PicClick Insights PicClick Exklusiv
  •  Popularität - 6,509 blicke, 3.0 views per day, 2,193 days on eBay. Super hohe von blicke. 32 verkauft, 43 verfügbar.
  •  Preis -
  •  Verkäufer - 3,397+ artikel verkauft. 0% negativ bewertungen. Großer Verkäufer mit sehr gutem positivem Rückgespräch und über 50 Bewertungen.
Ähnliche Artikel Items