Antelco 13 mm T-Shirt Ellenbogen Schlauchbeschlag Garten Bewässerung Rohr Stecker

EUR 12,12 Sofort-Kaufen, EUR 3,42 Versand, 30-Tag Rücknahmen, eBay-Käuferschutz
Verkäufer: growinsane ✉️ (23.678) 99.9%, Artikelstandort: Warrington, GB, Versand nach: WORLDWIDE, Artikelnummer: 263039619270 Antelco 13 mm T-Shirt Ellenbogen Schlauchbeschlag Garten Bewässerung Rohr Stecker.
  • 25mm Main Line Connectors
  • 19mm Main Line Connectors
  • 13mm Main Line Connectors
  • 4mm Micro Connectors
  • Sprayers, Spikes & Emitters
  • Valves
  • Pipe / Tubing
  • Tap Connectors / Filters
  • Stakes / Risers
  • Timers / Controllers
  • Hydroponics
  • Our Multi Item Listings
Antelco 13mm Fittings
Antelco 13mm to 4mm Reducing Tee Use this 13mm reducing to 4mm tee piece to easily install off-takes of micro supply pipe from 13mm supply pipe. To install this Tee piece, cut the 13mm pipe in the desired location, insert the reducing tee inline of the pipe, then push the 4mm micro supply pipe to the outlet. Premium quality product made by Antelco Australia Fits 13mm ID (internal diameter) pipes including standard garden hose, PVC irrigation pipe, Hozelock and soaker hose. Double barb for increased retention. Sharp-edged barbs create leak-proof seal. UV stabilised plastic for long life The materials used increase strength and give a superior quality that is heat, chemical and wear resistant.
13mm Straight Joiner The Antelco 13mm Irrigation Joiner is a high quality, barbed joiner for connecting supple hosing, this can allow for further lengths of supply pipe to be connected to the system and therefore the number of emitters (drippers, micro sprinklers, etc). For extra security, we recommend the use of a ratchet clamp to prevent pipe from slipping. Manufactured from high quality materials to be heat, chemical and wear resistant. UV stabilised to prevent deterioration under the sun. Essential components in low pressure micro irrigation systems. Antelco fittings are practical and durable.
13mm End Line Goof Plug Used to stop water flow at end of main supply hose. Essential components in low pressure micro irrigation systems. Used in conjunction with standard low pressure tubing. Antelco fittings are practical and durable. Fittings with single barb connection. UV stabilised materials for long life.Applications: Home gardens, greenhouses ,poly-tunnels, landscaping and professionally installed irrigation systems
13mm Elbow Fits 13mm ID (internal diameter) pipes including standard garden hose, PVC irrigation pipe, Hozelock and soaker hose. UV stabilised plastic for long life. Quality barbed acetal elbow piece fittings provide high retention in low pressure poly tubing for long-term reliability of connections. Can be confidently installed without clamps when matched to quality low pressure poly tubing with corresponding dimensions. Premium quality product made by Antelco, Australia Operating pressures should not exceed 300 kPa.
13mm Elbow Double Barb Use this 13mm Antelco Double Barb Elbow Connector to guide your system around corners to avoid kinking the pipe.

Premium quality product made by Antelco, Australia Fits 13mm ID (internal diameter) pipes including standard garden hose, PVC irrigation pipe, Hozelock and soaker hose. Double barb for increased retention. Sharp-edged barbs create leak-proof seal. UV stabilised plastic for long life

(Operating pressures should not exceed 300 kPa- pressure regulators available from our shop- if needed.) The 13mm Antelco Double Barb Elbow Connector is made from tough UV stable material for a long life . The materials used increase strength and give a superior quality that is heat, chemical and wear resistant.

13mm Tee Use this 13mm Antelco Double Barb Tee Connector to allow for further lengths of supply pipe to be connected and therefore the number of emitters and/or soaker hose

Premium quality product made by Antelco, Australia Fits 13mm ID (internal diameter) pipes including standard garden hose, PVC irrigation pipe, Hozelock and soaker hose. UV stabilised plastic for long life

Quality single-barbed acetal tee piece fittings provide high retention in low pressure poly tubing for long-term reliability of connections. The tee piece can be confidently installed without clamps when matched to quality low pressure poly tubing with corresponding dimensions (refer to the tubing manufacturer for confirmation of suitability or test under field conditions). Operating pressures should not exceed 300 kPa.

13mm Tee Double Barbed This 13mm Double Barb Tee acetal connector has been manufactured with the highest quality materials to be heat, chemical and wear resistant. In addition the design is double-barbed to offer a long term reliable connection between the pipe and connector. Antelco 13mm Double Barb Tee is used for adding an additional line to an irrigation system. Using this fitting; you can allow for further lengths of supply pipe to be connected and therefore the number of emitters and/or soaker hose. For extra security: We recommend the use of a ratchet clamp to prevent pipe from slipping. Premium quality product made by Antelco, Australia Fits 13mm ID (internal diameter) pipes including standard garden hose, PVC irrigation pipe, Hozelock and soaker hose. Double barbed variation for extra secure fit UV stabilised plastic for long life. Ensure operating pressures do not exceed 300 kPa, pressure regulators available if needed.
13mm Cross A useful connector for separating the flow of water within an irrigation system four ways allowing for more lines to be split in different directions. Simply attach the pipe from which the water supply is coming from, and attach three further lengths of pipe to receive the water. Suitable for use with 13mm pipe. Essential components in low pressure micro irrigation systems. Used in conjunction with standard low pressure tubing. Antelco fittings are practical and durable. Features Micro fittings with single barb connection. UV stabilised materials for long life. Applications Home gardens, landscaping, glasshouses and hanging baskets.
13mm In-Line Tap Valve Features Vari-Flow model allows for variable flow control by rotating the cap. Green Back valves designed for simple on-off operation and straight through flow. Green Back cap for standard irrigation applications. UV stabilised materials for long life. Applications Micro irrigation and low pressure irrigation systems. Rain tanks and other water vessel management systems. Secondary zone water diversion and flow control. Operating pressure up to 350 kPa. Always install as an in-line valve with tubes connected to both inlet and outlet.
13mm-22mm Hold Down Stake This Asta Hold Down Stake is compatible for holding down/securing drip, micro irrigation systems and LDPE piping from 12-22mm. UV stabilised materials for long life. Just push or hammer into the plant bed to keep your pipe in position.
13mm Saddle Clamp For use with regular hose (16mm External Diameter) piping/hosing. Used with polyethylene tubing in low pressure irrigation systems.Features: UV stabilised materials for long life.Applications: Home gardens, landscaping and professionally installed irrigation systems.
 
Payment:
We accept payment through Paypal ONLY. If you do not have Paypal account, please registered with (https://www.paypal.com)  Payment must be received within 5 days after the auctions ends. Please do not bid if you are not intending to buy. Unpaid dispute will be filed to ebay  for the non payable bidders. All prices include VAT and a tax invoice is provided but for non EU customers, prices are shown exclusive of VAT with no recourse to a VAT refund.
Shipping and Handling:
  • We only ship to the confirmed delivery address provided by Paypal.  Please ensure your preferred address matches the one you have registered at the time of payment.
  • Items shipped by 1st Class mail take 1-2 working days.
  • Items shipped by 2nd Class mail take 3-4 working days.
  • Items shipped by Airmail mail take 4-8 working days within Europe, depending on location and up to 14 working days beyond.
  • Items get shipped within 24 hours of payment clearing.
Return Policy
  • We are not responsible for custom duty or import tax if they become applicable
  • Items returned within 30 days of purchase in the same condition of receipt can be refunded or exchanged.
  • Please ensure to notify us of any defects with the product within 7 days of arrival.
  • We do our best to describe the items as accurately as possible, please review all photos and the item description before purchasing the item to ensure its suitability.
Feedback:
  • We will automatically leave positive feedback to everyone who has completed the transaction and leaves us positive feedback.
  • In the unlikely event you are not satisfied with the purchase, please contact us before you submit your evaluation.
  • We strive for 5-star service by stating upfront  our policies, our shipping rate and our shipping  frequency.
  • Please email me through 'MY MESSAGES' or "Ask  Seller Questions" if you have any question about our  listing or your purchase
Contact Us:
We are a private UK incorporated company, Grow Insane Ltd.  If you have any problems with our products we are happy to help and will aim to reply within 24hrs. You can also ask a question below:  
  • Condition: Neu
  • Item: 13mm to 4mm Reducing Tee
  • Pack Quantity: 25
  • Type: Irrigation Pipe Connectors
  • Country/Region of Manufacture: GB
  • Brand: Antelco
  • MPN: 17576

PicClick Insights - Antelco 13 mm T-Shirt Ellenbogen Schlauchbeschlag Garten Bewässerung Rohr Stecker PicClick Exklusiv

  •  Popularität - 377 Beobachter, 0.2 neue Beobachter pro Tag, 2.479 days for sale on eBay. Super hohe beobachtend. 538 verkauft, 10 verfügbar.
  •  Bestpreis -
  •  Verkäufer - 23.678+ artikel verkauft. 0.1% negativ bewertungen. Großer Verkäufer mit sehr gutem positivem Rückgespräch und über 50 Bewertungen.

Die Leute Mochten Auch PicClick Exklusiv