This is a fixed and roling frequency remote cloner (433.92mhz) for copying 99.99% common fixed and learning code remote controls. Compatible with Most Chips: these 433Mhz automatic sliding gate opener are compatible with 2264, 2260,1527, FP527, 2240, SMC918, and so on;
Please confirm your chips whether suitable before ordering
Easy to Duplicate: after removing the old code, you need to put the universal gate controller, remote control side by side, and press a button, then press the corresponding button to copy the old remote control, LED indicator will flash 3 times to let go, and other corresponding keys
Clear the Old Code: press and hold the A and B keys on the automatic electric door opener at the same time until the LED indicator flashes continuously before releasing; You can press any key to test, if the LED indicator flashes instead of blinking all the time, it means the code has been cleared
[Portable and Convenient]: There are 4 buttons each of the remote control key fobs, which can help you control the devices precisely.
Simple Pairing:The control key fobs have simple pairing with the remote original .
The garage door remote control is made of high quality plastic with good hardness and durability; Due to compact and sturdy structures, radio emitters are easily stored in pockets, key chains or in the car, and small occupied space
Package includes:
1 Remote Control (Battery already fitted)
Remote Duplicator User's Guide
It can duplicate the majority of the
wireless remote control in the market,
such as household burglar remote
control, automobile with extra anti
theft remote control, motorcycles
anti-theft remote control, electric
vehicle anti-theft remote control,
garage door remote control, electric
door remote control, etc. Its not
suitable for automotive original
remote control
Use steps and methods:
Step 1: clear
Press the first and the second key at
the same time, as the key pressed
the light will flash, then turn to
destroy, when turn to flash again,
loosen it.
if clear successfuly , as the moment
of key pressed the light will flared up,
as the key pressed down the light turn
to destroy.
Step 2:copy
The left hand press and hold the
button of the original remote control
to be learning, make the remote
duplicator close to the original remote
control, and press its button which
ready to copy by your right hand.
When the light of remote duplicator
turn to continuous flash , loosen it.
If copy successfully ,when you press
the button the light will burnt always ,
and the function also have become
same as the button of the original
remote control.
Step 3:use
If done correctly, can use directly. If
not, or individual button not useful,
please turn to clean and copy again,
notice the change of light during
operation. If problems still exist after
attempting several times, check the
chip and frequency of original remote
control again, and contact us.
Step 4: restore mistakenly deleted
data
When the user during use of the
mistake is cleared, and led to the
accidental deletion of data, while
holding down the second row of the
first key, and the second row of the
second button, press and hold at the
same time, when the light has been
flashing, that represent the data
recovery success.
Related parameters
a) working voltage: DC12V (one
battery of 27A)
b) working current: S8mA
c) working frequency: 433.92/315MHz
d) modulation mode: ASK
(amplitude modulation)
e) transmission power: s100mW
f) transmission distance: 50
100m (open space)
g) coding type: duplicate by self
h) working temperature: -10C~
+50C
i) USES: remote control electric
door, window, switch, security etc.