35cm Kameraplatte für Kamera Stativ Stativkopf Doppelseitig Klamme Clamp SJZ50

EUR 47,59 Sofort-Kaufen, Kostenloser Versand, eBay-Käuferschutz
Verkäufer: photoloving2008 ✉️ (17.641) 100%, Artikelstandort: CN, CN, Versand nach: WORLDWIDE, Artikelnummer: 174569574770 35cm Kameraplatte für Kamera Stativ Stativkopf Doppelseitig Klamme Clamp SJZ50.
iShoot Long-Focus Lens Support / Telephoto Lens Bracket / Camera Holder with Quick Release Plate IS-TB02 Portable Foldable Long Lens Bayonet Protector Sharing the Weight of the Camera and Lens Bayonet All Metal Improved New Type
Features:
1. Main body of the long-focus lens support is made of aviation aluminum, CNC precisely machined, surface anodized, laser engraved; the joint is made of stainless steel; reserved with function extension holes; PLEASE check the following detailed information for detailed use ranged; 2. The Telephoto lens bracket has three stainless steel joints. The joints connecting the camera body and the lens are non-adjustable damping joints; the main joints in the middle are locked and adjusted by a large knob; 3. Net weight is about 180g, foldable and easy to carry. The mounting track is about 60mm wide and equipped with 1/4" stainless steel screws. Suitable for all kinds of cameras with 1/4" screw hole at the bottom; 4. Quick release plate is about 65mm long, the mounting track is about 40mm long, and equipped with 1/4" stainless steel screw. Suitable for all kinds of lens with 1/4" screw hole on tripod ring; about 39mm wide, compatible with tripod head and clamp of 39mm RRS / ARCA-SWISS fit; 5. Bottom quick release plate is 39mm Arca-Swiss fit, compatible with RRS / ARCA-SWISS / PMG / WIMBERLEY / MARKINS / PHOTOCLAM / SUNWAYFOTO / BENRO / SIRUI / MARSACE / ISHOOT 39mm Arca fit tripod head and clamp, and suitable for IS-JZ30 / IS-JZ50 / IS-JZ64 / IS-QJ58 / IS-QJ64 / IS-QJ64-FD / IS-JZ60BK / IS-JZ70MFT / IS-JZ80BK and so on. 6. Can be combined with iShoot Quick Release Plate: QS-80PLUS, QS-120, QS-220, QS-350 and QS-160-COMB (Sold Separately) to use with more cameras and long lenses, which is installed between long-focus lens and camera body, sharing the weight of the camera bayonet, to protect long-focus lens and camera bayonet from damage, but also increase stability. Please check the relevant item variation for detailed use range.
Compatible with Lenses:
Note: Select cameras that the bottom of the camera body to be flush with or close to the bottom of the lens mount ring to fit the installation when testing. Such as Canon 1DX/5D3, Nikon D3S/D810, Sony a330/a6000. The large lens corresponds to the large camera body, the small lens corresponds to the small camera body, does not include the teleconverter. (The following ranges are for reference only) Canon: EF 100/2.8L IS USM MACRO              EF 180/3.5L USM MACRO              EF 200/2L IS USM              EF 200/2.8LII USM              EF 70-200/2.8L IS USM series              EF 70-200/4L IS USM series              EF 80-200/2.8L              EF 300/4L IS USM              EF 100-400/4-5.6L IS USM series              EF 400/5.6L IS USM Nikon: 70-200/4G ED             70-200/2.8G VR series             80-200/2.8D series             300/4D ED series             80-400/4.5-5.6D series             200-400/4D VR series             200-500/5.6E VR             500/5.6E VR Sony: FE PZ 28-135/4G OSS            FE 70-200/4G OSS            FE 70-200/2.8GM OSS            FE 100-400/4.5-5.6GM OSS            a 70-400/4-5.6G SSM Sigma: 50-100/1.8ART DC HSM              50-150/2.8EX DG HSM series              50-500/4.5-6.3DG HSM              60-600/4.5-6.3DG HSM              70-200/2.8EX DG HSM series              100-300/4EX DG HSM              150/2.8EX DG HSM series              180/2.8EX DG HSM series              120-300/2.8EX DG HSM              150-600/5-6.3DG HSM Tamron: 70-200/2.8DI VC USD series               70-210/4DI VC USD               100-400/4.5-6.3DI VC USD               150-600/5-6.3DI VC USD               180/3.5DI LD MACRO               200-500/5-6.3DI LD Tokina: AT-X 50-135/2.8DX               AT-X 70-200/4 FX               AT-X 80-400/4.5-5.6               AT-X 400/5.6 Fuji: XF 50-140/2.8 R LM OIS WR          XF 100-400/F4.5-5.6 R LM OIS WR          GF 250mm F4 R LM OIS WR Olympus: Zuiko Digital ED 35-100/2                  M.Zuiko Digital ED 40-150/2.8 Pro                  Zuiko Digital ED 50-200/2.8-3.5 SWD                  Zuiko Digital ED 150/2                  M.Zuiko Digital 300/4 IS Pro
Package Including:
1 x iShoot Long-Focus Camera Lens Support / Telephoto Lens Bracket IS-TB02 (The other items in the photos not listed here are for illustrating only, not included)

iShoot Long-Focus Lens Support / Telephoto Lens Bracket IS-TB01 All-metal material, with damping, foldable and retractable
Features:
1. Main body made of aviation aluminum, CNC precisely machined, surface oxidation treated; weight bearing joints and screws made of 304 stainless steel, weight about 140g; 2. The distance of the screw holes connecting quick release plate is about 23mm; with three joints with damping, foldable and retractable; camera screw chute is about 29.5mm; 3. Can be used with iShoot quick release plate QS-120, QS-220, or QS-350 (Sold Separately), installed between long-focus lens and camera body, sharing the weight of the camera mount, to protect long- focus lens and camera mount from damage, but also increase stability.
Package Including:
1 x iShoot Long-Focus Lens Support IS-TB01 (The other items in the photos not listed here are for illustrating only, not included)

iShoot CNC Aviation Aluminum Improved Arca-Swiss Fit Quick Release PlateQS-80PLUS 80mm Long, with Slot of 55mm Long, with Extension Holes
Features:
1. The quick release plate is made of high-density Aviation Aluminum, lightweight and solid; precisely machined by world-class high-end CNC turning center; hollowed-out work processed by Multi-Diamond Cutter finely; 2. Using vibration polishing technology and multiple anodic oxidation, greatly increased the color uniformity of the metal surface; the appearance and exquisite workmanship is much better than similar products made by mold; 3. Compared with the old model, QS-80PLUS has been modified in three places: one is being added extension holes, which can be used with IS-TB02; the other is that the slot of the mounting screw is extended to about 55mm, which is 10% longer than the old model; the third is the thickness is about 10mm, the bearing strength increases by 10%; 4. The volume of the quick release plate is about 80 x 38.5 x 10mm, the net weight is about 55g, with stainless steel screw, non-slip design; ACRA-SWISS / RRS standard fit, compatible with RRS / ARCA-SWISS / PMG / WIMBERLEY / MARKINS / PHOTOCLAM / SUNWAYFOTO / BENRO / SIRUI / MARSACE / ISHOOT ball head of Arca 39mm fit, suitable for iShoot IS-JZ30 / IS-JZ50 / IS-JZ64 / IS-QJ58 / IS-QJ64-FD / IS-JZ60BK / IS-JZ70MFT / IS-JZ80BK.
Applicable to:
Canon EOS 1D series / 1Ds series / 1DX series, Nikon D1/D2/D3/D4/D5/D6 series, and other large camera body with battery grip
Package Including:
1 x iShoot Arca Fit Quick Release Plate QS-80PLUS (The other items in the photos not listed here are for illustrating only, not included)

iShoot Multipurpose Metal Camera Quick Release Plate QS-120 --- 120mm long 2 pcs in Combination Can be Used as L-Shaped Vertical Quick Release Plate Compatible with RRS / ARCA-SWISS Fit Tripod Head Clamp
Features:
1. Made of aviation aluminum, CNC precisely machined, surface oxidation treatment, precision scale, net weight about 77g; 2. Total length is 123mm, length excluding pin is 120mm, width is 39mm, slide length is 95mm; 3. The plate is ideal for large cameras with battery grip, such as Canon 1DX II / 1DX / 1Ds Series, Nikon D6 / D5 / D4 Series, D3 / D3S / D3X Series, D2X / D2H Series, D1 / D1X / D1H Series, Fuji GFX100 Series / GFX50 Series, Hasselblad X1D Series; or a large camera of the same size. Can also be used for 120 cameras with screw hole in center, not suitable for ILDC cameras; 4. If two QS-120 quick release plates are used in combination, they can be used as L-shaped vertical shoot quick release plate, compatible with some large cameras with screw hole in center and strap hole positioned higher than 12cm; 5. With 39mm Arca-Swiss standard fit, compatible with RRS / ARCA-SWISS / KIRK / Wimberley / MARKINS / SUNWAYFOTO / kangrinpoche / BENRO / SIRUI / iShoot tripod head and clamp of AS standard interface.
Package Including:
1 x iShoot Multipurpose Metal Camera Quick Release Plate QS-120 (Note: The other items in the photos not listed here are for illustrating only, not included)

iShoot Lengthened Camera Quick Release Plate QS-220 --- 220mm Long, Double Slides, with Function Extension Holes Compatible with 39mm RRS / ARCA-SWISS Fit Tripod Head Clamp
Features:
1. Made of aviation aluminum, CNC precisely machined, surface multiple anodized; with two separate slides of 80mm long, reserved with multiple function extension holes, and provided with stainless steel screws; 2. The total length is about 220mm (not include screw), width is about 38.5mm, thickness is about 10mm, net weight is about 130g; 3. With 39mm Arca-Swiss fit, compatible with RRS / ARCA-SWISS / KIRK / Wimberley / MARKINS / SUNWAYFOTO / kangrinpoche / BENRO / SIRUI tripod head or clamp of Arca standard interface; 4. One end with two 1/4" screw holes with thread, the other end with two 1/4" holes without thread; can be used with iShoot long-focus lens support IS-TB01 (sold separately), support large long-focus lens over 400-800; or combined with iShoot quick release plate QS-120 (sold separately), working as a simple DIY L-Shaped quick release plate, can support most cameras.
Package Including:
1 x iShoot Lengthened Quick Release Plate QS-220 (The other items in the photos not listed here are for illustrating only, not included)

iShoot Lengthened Quick Release Plate QS-350 --- Extension Plate, Portable for Telephoto Lens Shooting Birds --- 350mm Long, Double Dovetail Slots, 3 Sliding Chutes Compatible with 39mm RRS / ARCA-SWISS Fit Tripod Head Clamp
Features:
1. The quick release plate is about 350mm long, 38.5mm wide, 14mm thick, and net weight about 260g; 2. Multifunctional design, with a built-in spirit level at one end, a compass at the other end, and reserved with function extension holes; 3. Designed with 3 sliding chutes about 93mm long and 8 x 1/4" screw hole for function extension purposes; adopts double-layer dovetail groove, engraved precisely scale; 4. With Arca-Swiss 39mm standard interface, compatible with Arca-Swiss / RRS / KIRK / WIMBERLEY / MARKINS / SUNWAYFOTO / KANGRINPOCHE / BENRO / SIRUI / MARSACE ball heads of RRS Standard Interface, suitable for IS-JZ30 / IS-JZ50 / IS-JZ64 / IS-QJ58 / IS- QJ64 / IS-JZ60BK / IS-70BK / IS-JZ80BK clamp, etc; 5. The quick release plate is made of Aviation Aluminum, CNC precisely machined, polished and surface anodized finish. The appearance and exquisite workmanship are much better than similar products made by mold; 6. Reserved with extension holes for mounting iShoot long-focus lens support IS-TB01 or IS-TB02 (Sold Separately), which is installed between long-focus lens and camera body, sharing the weight of the camera bayonet, to protect long-focus lens and camera bayonet from damage, but also increase stability.
Note When Used with IS-TB01:
1. The distance between the screw hole of the lens tripod mount ring and the screw hole of the camera bottom must be over 8cm to install this combination; 2. This combination don't support cameras with battery grip, only support cameras without battery grip.
IS-TB02+QS-350 (Sold Separately) Compatible with Lenses:
Note:  Select cameras which the bottom of the camera body to be flush with or close to the bottom of the lens mount ring to fit the installation when testing. Such as Canon 1DX/5D3, Nikon D3S/D810, Sony a330/a6000. The large lens corresponds to the large camera body, the small lens corresponds to the small camera body, does not include the teleconverter. (The following ranges are for reference only) Canon EF 600/4L IS USM series             EF 800/5.6 IS USM Nikon 600/4E FL ED VR            600/4E FL ED VR series            800/5.6E FL ED VR Sigma 300-800/5.6 EX DG HSM             800/5.6 EX DG HSM
Package Including:
1 x iShoot Lengthened Quick Release Plate QS-350 (The other items in the photos not listed here are for illustrating only, not included)

iShoot Lengthened Quick Release Plate Combo QS-160-Combo Compatible with Manfrotto and Sachtler Tripod Fluid Head
Features:
1. Made of aviation aluminum, CNC precisely machined, hollow-out weight reduction design, polished and surface anodized, laser scale, with stainless steel screw; 2. The combo consists of two quick release plates. Their net weight is about 180g including screws. The volume of the large plate is about 160mm x 50mm x 12mm, the volume of the small plate is about 62mm x 45mm x 8mm. The large quick release plate adopts 2 x 60mm slideways, with 4 x M3 screw holes, 8 x 1/4 screw holes, and 2 extension holes; 3. This quick release plate combo suitable for many kinds of fluid heads, including Manfrotto 500 series, 700 series, Sachtler FSB 10T/FSB 8T/ FSB 6T, DV2/DV8/DV10SB/DV12SB, V14/V18/ACE XL series, and other tripod heads of the same structure; 4. Can be used with iShoot Long-focus lens support IS-TB02 (Sold Separately), which is installed between long-focus lens and camera body, sharing the weight of the camera bayonet, to protect long-focus lens and camera bayonet from damage, but also increase stability.
Note:
The design of the bottom of the quick release plate is different from Manfrotto, the one-way installation is changed to two-way installation, so it needs to be installed or removed when the tripod head is horizontal to prevent falling off. QS-160-Combo+IS-TB02 (Sold Separately) Compatible with Many Kinds of Fluid Heads, like: Manfrotto 500 series, 700 series Sachtler FSB 10T/FSB 8T/ FSB 6T, DV2/DV8/DV10SB/DV12SB, V14/V18/ACE XL series And other tripod heads of the same structure
Package Including:
1 x Lengthened Quick Release Plate Combo QS-160-Combo (The other items in the photos not listed here are for illustrating only, not included)

iShoot Metal Double-sided Clamp IS-SJZ50 Compatible with RRS / ARCA-SWISS 39mm Fit Quick Release Plate
Features:
1. Made of aviation aluminum, CNC precisely machined, surface oxidation treated, with 3/8" screw hole, precision scale; 2. Dimensions is about 90 x 50 x 20mm, weight about 120g; using two locking knobs, both front side and back side are RRS / ARCA-SWISS standard clamp, compatible with 39mm quick release plate; 3. Compatible with RRS / ARCA-SWISS / KIRK / Wimberley / MARKINS / SUNWAYFOTO / kangrinpoche / BENRO / SIRUI quick release plate of 39mm Arca standard fit; 4. 2 x Metal Double-sided Clamp IS-SJZ50 combined with iShoot Long Quick Release Plate QS-350 (Sold Separately) can support 2 cameras or lenses.
Package Including:
1 x iShoot Metal Double-sided Clamp IS-SJZ50 (The other items in the photos not listed here are for illustrating only, not included)

  • Condition: Neu
  • Product Option: Long Lens Support IS-TB02
  • Marke: iShoot
  • Modell: QS-350
  • Produktart: Klemmhalterung
  • Markenkompatibilität: Für Arca-Swiss

PicClick Insights - 35cm Kameraplatte für Kamera Stativ Stativkopf Doppelseitig Klamme Clamp SJZ50 PicClick Exklusiv

  •  Popularität - 1 beobachter, 0.0 neue Beobachter pro Tag, 1.193 days for sale on eBay. Normale beobachtend. 0 verkauft, 2 verfügbar.
  •  Bestpreis -
  •  Verkäufer - 17.641+ artikel verkauft. 0% negativ bewertungen. Großer Verkäufer mit sehr gutem positivem Rückgespräch und über 50 Bewertungen.

Die Leute Mochten Auch PicClick Exklusiv