3 Achse 304 Edelstahl 220V 1.5KW 60Hz VFD Graviermaschine 6040 3D CNC PVC PCB

EUR 1.030,00 Sofort-Kaufen oder Preisvorschlag, Kostenloser Versand, eBay-Käuferschutz
Verkäufer: ursmartchoices ✉️ (773) 99.6%, Artikelstandort: Leipzig, DE, Versand nach: EUROPEAN_UNION, GB, Artikelnummer: 134956971566 3 Achse 304 Edelstahl 220V 1.5KW 60Hz VFD Graviermaschine 6040 3D CNC PVC PCB . 3 Achse 6040 CNC Fräsmaschine Portalfräse Wasserkühlung Graviermaschine 1500W VFD SKU:3AIX60401+3AIX60403+3AIX60404+TS007 Attention: This machine needs to be connected to a computer through its controller box with a parallel cable (both included). It is not recommended to connect it to a notebook through a parallel port as the power saving features tend to interrupt the data flow. It is also not recommended to connect it to computers with 64 bit versions of Windows due to problems with the parallel port driver. These issues are detailed and fully explained on the Installment software website. Pack List: 1X main unit (Frame) 1X main unit (working base) 2X Fence baffle 1X control box 1X pump 1X 25pin Parallel lines 2X cutter 2*6mm 2X cutter 3*6mm 10X 4*7mm round head 6X 4*10m
3 Achse CNC 6040 Fräsmaschine, Portalfräse, Graviermaschine, Wasserkühlung 1500W
  • 3 Achse 6040 CNC Fräsmaschine Portalfräse Wasserkühlung Graviermaschine 1500W VFD

    SKU:3AIX60401+3AIX60403+3AIX60404+TS007

    Attention:  This machine needs to be connected to a computer through its controller box with a parallel cable (both included). It is not recommended to connect it to a notebook through a parallel port as the power saving features tend to interrupt the data flow. It is also not recommended to connect it to computers with 64 bit versions of Windows due to problems with the parallel port driver. These issues are detailed and fully explained on the Installment software website.

    Pack List:

    1X main unit (Frame)

    1X main unit (working base)

    2X Fence baffle

    1X control box

     

    1X pump

    1X 25pin Parallel lines

    2X cutter 2*6mm

    2X cutter 3*6mm

    10X 4*7mm round head

    6X 4*10mm black Inner six angle screw with nut

    8X 5*20mm black Inner six angle screw

    4X 5*8mm Flat Philip's head screw with nut and gasket

    8X 6*24mm BALCK FLAT Inner six angle screw

    12X Aluminium fastener

    1X 13-15# Wrench

    1X 14-17# Wrench

    2X six angle Wrench(3mm)

    2X six angle Wrench(4mm)

    1X Teflon tape

    2X Fuse (5A)

    1X Power cable

    1X Manual

    2X CD

    Description

    suitable for PCB,wood,Plexiglass,PVC,Crystal Acrylic,RESIN,Plastic,SEALS, MDF,COMPOSITE,Aluminum material,Copper,

    1.This CNC 6040T machine is suitable for industry, Technology Research, Advertising Design,Arts Creation, Teaching, Student Project and Hobby Purposes.

    2.It can work with various materials(metallic & non-metallic), such as: wood, pmma or other plastic,MDF board, native wood, PVC, Acrylic, wood, composite board plywood. and soft metal .like aluminum,

    copper and silver to engrave them into 3D/2D works etc.

    3.It can used for engraving: advertising signs, PCB, nameplates, badges, seals, bronzing plate,aluminum alloy, acrylic plates, ABS resin double color plate,PVC foaming board, indentation plates, signs,

    construction models, instrument panels, wooden products, etc.

    4.The mini CNC router Frame is movable. The machine can connect with computer as   other external device such as printer , scanner...

    5.With the assist of the CNC ROUTER 6040T, your design idea will be real-time display.

    cnc engraving machine parameters:

    X,Y,Z Working Area:600(Y)*390(X)*120(Z)mm

    Outside dimension:865*680*570mm(L*W*H)

    Table size:770(Y)*490(X)mm

    Lathe structure:6061/6063 Aluminium alloy

    Max. Feeding height:≤100mm

    Drive unit:

    X axis:1605 Ball Screws

    Y axis:1605 Ball Screws

    Z axis:1204 Ball Screws

    Sliding unit:

    X axis:High intensity Chromeplate shaft

    Y axis:High intensity Chromeplate shaft

    Z axis:High intensity Chromeplate shaft

    Stepping motor:57 two-phase 3A 150N.cm

    Spindle motor

    (tips:1,The spindle motor must connect with the VFD.

    2,It cannot directly connect with the supply voltage (AC110V).

    3,Please don’t change the data setting of the VFD if you are not professional technicians, or it might damage the spindle motor.

    Outside dimension:80*188mm

    Material:304 stainless steel,Copper coil,Pressure cast aluminum pipe water jacket

    VOLTS,current,power:AC220 /50Hz,5A,1.5KW VFD

    Spindle speed:24000 rpm

    Max working frequency:400Hz

    Principal axis collet:ER11collet,Standard configuration :6mm

    Nut Model: ER11-A

    Cooling: Water-cooling

    Speed mode:By adjusting the VFD output voltage and operating frequency:from 0-24000RPM

    Lubrication way:lubricated by high grease

    Repeat accuracy:0.05mm

    Spindle precision:radial beat acuities 0.03mm

    Carving Instructions:G code / TAB files / nc file / NCC files

    Communication interface:through parallel connection with computer

    Software environment:windows XP / win7

    Maximum Idle speed:1500mm/min

    Working Speed :50-1500mm / min (different material with different speed settings)

    Friendly reminder:  The engraver will come with Installment software(Free Version

    If you followed the   in s tal l ation tips offered by us, it works like full version.)

    in s tal l ation tips:

    The software perferm better on the 32bites system computer.

    Please close the firewall and antivirus software on the computer before DOWNLOAD AND install the software.(This is very important)

    Otherwise, the antivirus will regards the cnc software is virus and stop the installation.

    PS:Please don't update the software when installed, then it will not need the license Numbers.

    Control box parameters:

    Operating Voltage:AC220V

    Control unit:Toroidal transformer + PWM power supply module + TB6560 stepping motor drive

    Computer connection:Parallel port

    Command code:G code

    Acceptable software:Installment software,EMC2

    Protection:Emergency stop button

    Feature:

    1,The NEW 1.5KW water-cooled VFD is available operating for long time,which can reinforced the processing   abil i ty of the machine and can be used to   process aluminum alloy and hard wood.

    2,water cooling spindle works more stable and durable.

    3, High quality accurate ball Screws drive make the engrving more precision.Anti-blackflash,high precision,long life circle.

    4, Software Compatability:Installment software/Emc2/Type3/ArtCAMParameter

    How to use

    1.Assembling and locating the CNC machine on steady desk well.

    2.Make sure that your computer has a 25pin parallel port output.

    3. Place the contr o l box in a ventilated dry place where there is no dust,no moisture

    4.Connecting the control box with the CNC machine and you computer

    and make sure the plug will not come off.

    5.Correctly connect the machine with the controller. Don't suspended

    the cable which connect the Spindle motor with   axis(X,Y,Z,A).Otherwise, It will   damage   the driver of the controller.

    6.Correctly insta l l the Spindle motor and the heat pump. The heat pump   should be covered completely in the water, then turned on the electric current to check whether   the water-cooling system working well.

    7.Installing a CNC control software and Drive such as the Installment software or EMC2on your computer.

    8.F o llowing our manual or guideline to set uo the software.

    9. Before turn on the machine, please check all the cable and water-

    cooling system to make sure they are working fine.

    6.You can enjoy making you dream with using our CNC machine now.

    If you have any problem. Please contact us through eBay Message and we will gladly assist you.

    BezahlungLieferdetailsRücknahmegarantieFeedbackkontaktieren Sie unsBezahlung   Wir akzeptieren nur Paypal als Zahlungsweise. Nachdem Sie bestellt haben, müssen Sie innerhalb 7 Tage bezahlen Normalerweise senden wir die Ware als ein Geschenk an Sie, indem Sie keinen Zollgebühren bezahlen können. Der Gebühren ist wie Import Steuern, der Kaufpreis und die Versandkosten enthalten nicht Zollgebühren. der Käufer ist für dies verantwortlich Lieferdetails Bitte beachten Sie sich bei Zahlung via Vorkasse: Erfahrungsgemäß dauert eine Überweisung je nach Bank 2-3 Tage, bis das Geld überwiesen ist. Sobald Ihre Zahlung eingegangen ist, schicken wir Ihnen die Ware innerhalb 48 Stunden los. Am Samstag und Sonntag erfolgt keine Zustellung und kein Versand. Großhandel an Sie Rabatt Preise ,Herzlichen Willkommen bei uns einkaufen!!   3-7 Tage : DEUTSCHLAND   5-10Tage :Andere Länder Wir versprechen, dass jeder Artikel losgeschickt hat. Aber machmal gibt es auch 0.3% Paket während  transportieren zu verloren. Wenn dies passiert, nachdem wir dies mit dem Post bestätigt haben, werden wir Ihnen das Paket so schnell wie möglich nochmal schicken oder erstatten Ihnen sofort das Geld zurück.  Rücknahmegarantie
      •  
    Unsere alle Ware sind Original und neu. Bevor wir Ihnen die Ware losschicken, werden wir die Ware absolute prüfen. unseres Ziel ist, lassen Sie zufrieden sein. Wenn Sie die Ware nicht mögen und die uns zurücksenden möchten, sehen Sie bitte unten: Bevor Sie uns die Ware zurückgesandt haben, sagen Sie bitte uns zu ersten, dann werden wir Ihnen unsere Retourschein. bitte senden Sei uns die Ware innerhalb 3 Tage zurück, nachdem Sie die Ware erhalten haben bitte bestätigen Sie,die Ware wie original einpacken. und  Sie sollen auch die Rücksendungskosten tragen Nachdem wir das Paket von Ihnen bekommen und geprüft haben, werden wir Ihnen das Geld so schnell wie möglich zurückerstatten. Wenn die Ware während transportieren gebrochen haben, können Wir Ihnen das Geld zurückerstatten, nachdem wir die Ware wieder bekommen haben, oder tauschen wir Ihnen eine neue Ware um.  Aber bitte vergessen Sie nicht uns einige deutliche Fotos zu schicken
    •  
    Feedback Dank für den Kauf von meinem Geschäft. Wenn Sie irgendein Problem mit dem Einzelteil, wenn Sie es erhalten haben, bitte zögern Sie nicht, mit uns Kontakt aufzunehmen. Wir bieten Ihnen die beste Lösung für jedes Problem mit dem Einzelteil. Wir würden uns freuen, wenn Sie uns freundlich in Verbindung, bevor uns eine Rücknahmeverlangen oder Verlassen negatives Feedback. freundliche Grüße   kontaktieren Sie uns Arbeitszeit : Montag bis Freitag 8:30 AM bis 5:00 PM (Beijing Zeit) Wegen des Zeitunterschied können vielleicht wir ihre Frage nicht rechtzeitig antworten. Aber in unserem Arbeitstag, werden wir ihre Email innerhalb 24 Stunden antworten. Im Wochenende sein Sie bitte so nett und warten geduldig bis am Montag. Vielen dank! Bitte schreiben Sie uns an Ebay Message. Sollten noch weitere Fragen auftreten, bitte zögern Sie nicht mit uns in Kontakt zu treten, wir sind gerne bereit Ihnen zu helfen, um zu einem befriedigenden Resultat zu kommen.


    Am 30.12.2022 hat der Verkäufer die folgenden Angaben hinzugefügt:


    Am 29.08.2023 hat der Verkäufer die folgenden Angaben hinzugefügt:


    Am 29.02.2024 hat der Verkäufer die folgenden Angaben hinzugefügt:

    • Condition: Neu
    • Marke: Markenlos
    • Protection: Emergency stop button
    • Acceptable software: Installment software,EMC2
    • Command code: G code
    • Computer connection: Parallel port
    • Control unit: Toroidal transformer + PWM power supply module
    • Operating Voltage: AC220V
    • Software environment: windows XP / win7
    • Communication interface: through parallel connection with computer
    • Carving Instructions: G code / TAB files / nc file / NCC files
    • Cooling: Water-cooling
    • Nut Model: ER11-A
    • Principal axis collet: ER11collet,Standard configuration :6mm
    • Max working frequency: 60Hz
    • Stepping motor: 57 two-phase 3A 150N.cm
    • Lathe structure: 6061/6063 Aluminium alloy
    • X,Y,Z Working Area: 600(Y)*390(X)*120(Z)mm
  • PicClick Insights - 3 Achse 304 Edelstahl 220V 1.5KW 60Hz VFD Graviermaschine 6040 3D CNC PVC PCB PicClick Exklusiv

    •  Popularität - 0 Beobachter, 0.0 neue Beobachter pro Tag, 29 days for sale on eBay. 0 verkauft, 10 verfügbar.
    •  Bestpreis -
    •  Verkäufer - 773+ artikel verkauft. 0.4% negativ bewertungen. Großer Verkäufer mit sehr gutem positivem Rückgespräch und über 50 Bewertungen.

    Die Leute Mochten Auch PicClick Exklusiv