1-2 CH DC12V AC220V Wireless RF Remote Control Receiver Relay Switch 315/433MHz

Verkauft Siehe ähnliche Artikel EUR 4,07 Sofort-Kaufen, EUR 0,67 Versand, 30-Tag Rücknahmen, eBay-Käuferschutz
Verkäufer: ecamonline2012 ✉️ (448.553) 0%, Artikelstandort: HK, HK, Versand nach: WORLDWIDE, Artikelnummer: 371785148157 1-2 CH DC12V AC220V Wireless RF Remote Control Receiver Relay Switch 315/433MHz.

Similar Items 315/433MHz 1CH Channel 220V 10A Wireless Relay Remote Control Switch Receiver CAD:3.99    

Description

Package included:
1 x 12V/220V 1CH / 2 CH Wireless Relay Switch

1CH / 2 CH DC12V 10A independent wireless controller
Applicable for controlling family, office, shopping malls, hotels, hospital, warehouses and other places of fluorescent lamps, energy-saving lamps, incandescent lamp, halogen lamp, and the electric water heater through a power on-off control of household appliances.
it can learn 2272 2262 or 1527 chip with the different code wireless remote control

Learning :
1. Press the learning button A until the indicator flash ,loosen your finger
2. Press button A of the remote control ,the indicator flash 2 times and off .it mean you learn it successfully (Learning button B also the same )
Pemove/clean :
Press the learning button about 8 seconds , the indicator turn on to off, it means the information that you keep have been removed successfully .

Features :
2 CH Wireless Receiver Relay

1 .Board dimension: (LxWxH)45*30*16mm
2. Box dimension: (LxWxH)53*38*22mm
3 .Work Voltage: DC12V
4. Work Load: 10A
5. Work Frequency: 315MHz
6. Receiver Sensitivity: -108dBm
7. Wock Temperature: -20℃~+70℃(-4℉~158℉)
8. Output: switching signal / voltage output
9. The code way: Learning
10. Quiescent Current: ≤8mA

Output working way
1.Inching: press&hold one button, the reply turns on, release the button, the reply turns off.
2.Self-lock: press the one button, the reply turns on, press the button again, the reply turns off.
3.Interlock: press the one button, the reply turns on, press the next button, the reply turns off.
4.Two-way independent Output


1 CH Wireless Relay Switch

1.Input Voltage: DC10-14V
2.Standby Current: <5MA
3.RF Frequency: 433MHZ
4.RF Working mode:Super heterodyne receiver
5.Receiver Sensitivity: >90dBm
6.Remote Control Distance: >100 meter(In open environment)
7.Decoding Way: MCU Software decoding
8.Can store the number of remote control:50
9.Support remote control type: Fixed code, learning code
10.Channel: 1CH
11.Multiple working modes: (Jog/Non-Latched ,inter-lock/Latched ,self-lock /Self-Latched,Delay off)
12.Wiring Method:Fixed wiring terminal
13.Working Voltage: DC12V
14.Output Current: 10A
15.Rated load:10A 250VAC / 10A 125VAC
10A 30VDC / 10A 28VDC
16.Output:Normally open,Common,Normally closed
17.Dimension:3.5cm*3cm*1.6cm

Working/output way:
1.Jog/Non-Latched: Press one button is Working /ON. Loosen your finger on the same button is Stop/OFF. One channel switch need one buttons remote control.
2.Self -lock/Self-Latched: Press one button for one time is working/ON. Press the same button again is stop/OFF. One channel switch need one buttons remote control.
3.Inter-lock /Latched: Press one button is working/ON, press another button is stop/OFF. One channel switch need 2 buttons remote control.
4.Delay: Press remote control relay pull-in,release the remote control and begin timekeeping,after 5s,10s,15s will automatically close the relay

220V 1 CH Wireless Relay Switch

1.Input Voltage: AC85V-AC220V
2.RF Frequency: 315/433MHZ
3.RF Working mode:Super heterodyne receiver
4.Receiver Sensitivity: -107dBm
5.Remote Control Distance: >100 meter(In open environment)
6.Decoding Way: MCU Software decoding
7.Can store the number of remote control:32
8.Support remote control type: Fixed code, learning code
9.Channel: 1CH
10.Multiple working modes: (Jog/Non-Latched ,inter-lock/Latched ,self-lock /Self-Latched)
11.Wiring Method:Fixed wiring terminal
12.Rated load:10A 250VAC / 10A 125VAC
10A 30VDC / 10A 28VDC
13.Dimension:5.4cm*3.1cm*1.4cm

Working/output way:
1.Jog/Non-Latched: Press one button is Working /ON. Loosen your finger on the same button is Stop/OFF. One channel switch need one buttons remote control.
2.Self -lock/Self-Latched: Press one button for one time is working/ON. Press the same button again is stop/OFF. One channel switch need one buttons remote control.
3.Inter-lock /Latched: Press one button is working/ON, press another button is stop/OFF. One channel switch need 2 buttons remote control.

220V 2 CH Wireless Relay Switch

1.Input Voltage: AC85V-AC220V
2.RF Frequency: 315/433MHZ
3.RF Working mode:Super heterodyne receiver
4.Receiver Sensitivity: -107dBm
5.Remote Control Distance: >100 meter(In open environment)
6.Decoding Way: MCU Software decoding
7.Can store the number of remote control:32
8.Support remote control type: Fixed code, learning code
9.Channel: 2CH
10.Multiple working modes: (Jog/Non-Latched ,inter-lock/Latched ,self-lock /Self-Latched)
11.Wiring Method:Fixed wiring terminal
12.Rated load:10A 250VAC / 10A 125VAC
10A 30VDC / 10A 28VDC
13.Dimension:6.9cm*4.85cm*1.7cm

Working/output way:
1.Jog/Non-Latched: Press one button is Working /ON. Loosen your finger on the same button is Stop/OFF. One channel switch need one buttons remote control.
2.Self -lock/Self-Latched: Press one button for one time is working/ON. Press the same button again is stop/OFF. One channel switch need one buttons remote control.
3.Inter-lock /Latched: Press one button is working/ON, press another button is stop/OFF. One channel switch need 2 buttons remote control.

Reset new operating mode
1. Jogging
Press the white learning button on the top of the control panel, LED lights, and then press any button on the remote control set to 'Jog' button, the control panel LED lights flashing, indicating that the setup is complete
2. Self-locking
Press the white learning button on the top of the control panel, LED lights, and then press any button on the remote control to set to 'self-locking' button, the control panel LED lights flashing,
3. Interlock
Press the white learning button on the control panel, the LED lights, and then press any button on the remote control set to 'start' button, the control panel LED lights flashing, press another button to set to 'stop' button LED Blinking means the setting is complete


 

Detail Image

Payment

1.We accept PayPal only.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of auction closing.
4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.

Shipping

1.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
2.Items will be shipped within 1-3 business day when we received payment.
3.Delivery time depends on destination and other factors;
4.International buyers please note:
  a.Import duties, taxes and charges are not included in the item price or shipping charges. These charges are buyer’s responsibility. We will try our best to reduce the risk of the custom duties.
  b.Please check with your country's customs office to determine what these additional costs will be prior to buying.

  • Condition: Neu
  • Type: 1 Channel 433Mhz
  • Brand: Unbranded/Generic
  • MPN: NVW442052
  • Country/Region of Manufacture: Unknown
  • Contents of the package: 1X Wireless Receiver Relay

PicClick Insights - 1-2 CH DC12V AC220V Wireless RF Remote Control Receiver Relay Switch 315/433MHz PicClick Exklusiv

  •  Popularität - 368 Beobachter, 0.3 neue Beobachter pro Tag, 1.195 days for sale on eBay. Super hohe beobachtend. 437 verkauft, 3 verfügbar.
  •  Bestpreis -
  •  Verkäufer - 448.553+ artikel verkauft. 0% negativ bewertungen. Guter Verkäufer mit positivem Feedback und gute Bewertung.

Die Leute Mochten Auch PicClick Exklusiv