Genuine Components Professionally Handmade to Order
A quality professional guitar lead made to last for many years. Made with genuine Neutrik NP2RX-B Black with Gold contact right angle 1/4" (6.35mm) jack plugs on both ends of the lead and Van Damme XKE Dual Screened silver plated cable, for better sound quality. We also use 4 percent silver solder when making this lead for better sound and a better solder joint.
Neutrik and Van Damme are some of the best branded names in professional audio leads and have the specifications to match so you will get great sound, robustness and reliability from them. Many of our customers comment on the quality of the leads and sound quality over other makes.
We make many other leads with other connector combinations please see all the range Click Here
Choose your Van Damme cable length and cable Colour. Black, Red, Orange, Yellow, Green, Blue, Purple, White. If you want a length that isn't shown or want it a specific length please let us know and we will make it.
Leads made up by us
We have over 30 years experience in the industry. We make the lead up with great care and attention in our workshop and it is fully tested and inspected before leaving us.
This lead is also known as:
Guitar Lead Instrument Lead Keyboard Lead TS Screened Lead Mono 1/4" Jack Lead 2 pole 1/4 Jack Lead Right Angle Jack Plug Guitar Lead Unbalanced 1/4" Jack Plug Lead Screen Jack Plug Lead 6.35mm Jack Plug Lead Jack to Jack Unbalanced Screened Lead All the terms are the same.
Connections are made between the connectors on:
Tip Jack (Hot) - Tip Jack (Hot) Sleeve Jack (Screen) - Sleeve Jack (Screen)
These are standard connections.
Lead Length: Know what you are buying. 1m and below will be visible length - This is cable length you would physical see from the rear of the Jack plugs. 1.5m and above will be cut length cable and connectors added. 110mm of the cable will be inside the connectors. If you want a lead that is precise length let us know.
For mic/line level use only - this is NOT for connections between an amplifier output to passive speaker. This lead is a unbalanced configuration, it can be used on equipment that is unbalanced or balanced configurations or a combination of the two. If you do have balanced audio on both input and output - please use a balanced lead - available in our ebay store.
Please consult your user manual for both of your input and output audio equipment if you are unsure.
Typical applications for this lead:
All equipment must have 1/4" (6.35mm) Jack Sockets on.
Main use: Guitar to Guitar amplifier
Can also be used for: Keyboard to Keyboard amplifier Unbalanced equipment with jack input and outputs Aux out on a mixer to active monitor speaker Mixer main output to active powered speakers unbalanced
Mechanical specification Van Damme Pro Grade XKE Instrument Cable
Conductors Material - Bare silver plated ultra pure oxygen free copper wire Stranding - 3 x 0.20mm Material - Bare ultra pure oxygen free copper wire Stranding - 4 x 0.20mm
Insulation Material - Foamed Polyethylene Diameter - 1.60mm ±0.10
Screen 1 Type - 0.40mm conductive thermoplastic
Screen 2 Type - 80 x 0.10mm close lapped oxygen free copper wire
Outer Jacket
Material - Flexible PVC/Neoprene composite Average thickness - 1.70mm Overall diameter - 6.00mm ±0.15
Physical properties un-aged Jacket (at 60ºC) Tensile strength - >8N/mm2 Elongation - >250% Heat shock test - 120 ºC x 1 hour – no cracks Test voltage - 1000 Vdc x 1 minute OK
Electrical characteristics Resistance Conductor Ohm/Km <90 Insulation M Ohm/Km >5000 Capacitance Core to shield pF/m <90
Neutrik Connectors: Neutrik make some of the best connectors that are available the world over. There are many copies of the Neutrik connectors available on the internet, don't be fooled by the cheaper makes they may break down and cause problems, why risk it? These are genuine Neutrik connectors.