Smartpartz Hard Core Baffles For Vance And Hines Big Radius 2 Into 2 Exhaust

Verkauft Siehe ähnliche Artikel EUR 105,03 Sofort-Kaufen, EUR 15,12 Versand, 30-Tag Rücknahmen, eBay-Käuferschutz
Verkäufer: arhcustomltd ✉️ (13.710) 99.8%, Artikelstandort: BLACKPOOL, GB, Versand nach: WORLDWIDE, Artikelnummer: 322189896386 SMARTPARTZ HARD CORE BAFFLES FOR VANCE AND HINES BIG RADIUS 2 INTO 2 EXHAUST.

SMARTPARTZ HARD CORE BAFFLES FOR VANCE AND HINES

BIG RADIUS 2 INTO 2 EXHAUST

FITS THE FOLLOWING EXHAUSTS:

Vance & Hines Big Radius 2 into 2

(Where outside diameter of exhaust [not heat shield] is 2.125".  *Not for V&H Big Radius PC where exhaust o.d. = 2.5".)

CONTENTS : 

2 Hard Kore Quiet Baffles,

1 Allen Key.

 

IMPORTANT :

Use Loctite on all screws.

Use WD40 on end of original baffle to ease reinstallation.

INSTALLATION INSTRUCTIONS:

1.  Remove the heat shield and original baffle with allen key provided.

2.  Drill 5/16” hole in original baffle 7/16" from the end, close to the original hole in the original baffle.**

3.  Insert Smartpartz Hard Kore Quiet Baffle into original baffle so that the Hard Kore Baffle is hard up against the end of the original baffle and the Smartpartz Hard Kore Baffle threaded tab is centered in the hole you drilled.

4.  Reinsert original baffle with Hard Kore Baffle into exhaust pipe.  Align hole.  Reinsert allen screw from original baffle through the exhaust pipe, through the hole you drilled and into the Smartpartz Hard Kore Quiet Baffle, and tighten.

5.  Reinstall the heatshield.

** If you have trouble rotating the original baffle the small amount required because it is too tight, there are 2 alternative installation options:

(Alternative 1 Install) Remove the threaded tab from the original baffle with a dremel tool or sharp chisel (this tab will normally knock off pretty easily) - see pic below.  Then you can use the hole from the original baffle to attach our baffle.  Should you decide that you wanted to remove our baffles, you would just need to get a ¼ 20 nut from any hardware store and secure the original baffle with the original screw and the nut.

(Alternative 2 Install) Remove heatshield and drill hole through the inner exhaust and the original baffle next to the threaded tab in the original baffle and secure our baffle.  Once heat shield is replaced you will not see the screw.

INSTALLED BAFFLES BEFORE HEAT SHIELDS BEING ADDED

INSTALLATION COMPLETE

WE ARE AN OFFICIAL SMARTPARTZ DEALER AND ONLY SELL 100% GENUINE ITEMS

ABOUT US

WELCOME TO FOGGIMOTO, YOUR ONE STOP SHOP FOR ALL MOTORCYCLE RELATED PARTS AND NEEDS. OUR AIM IS TO PROVIDE OUR CUSTOMERS WITH READILY AVAILABLE PARTS, APPAREL, LUGGAGE, HELMETS AND ACCESSORIES WHICH ARE MADE TO THE HIGHEST STANDARDS.

IF YOU HAVE ANY QUESTIONS ABOUT PLACING AN ORDER OR A CURRENT ORDER, FEEL FREE TO CONTACT US THROUGH EBAY AND ONE OF OUR STAFF WILL HELP YOU.

 

DELIVERY & RETURNS

HERE AT FOGGIMOTO WE OFFER FREE SHIPPING ON ALL ORDERS TO THE UNITED KINGDOM INCLUDING NORTHERN IRELAND.

WE AIM TO SHIP ALL ORDERS WITHIN 1-2 WORKING DAYS, WHEN SENDING SMALLER ITEMS, WE USE ROYAL MAIL SIGNED FOR. LARGER ITEMS ARE SENT OUT WITH FEDEX OR INTERLINK EXPRESS DEPENDING ON YOUR LOCATION. INTERNATIONAL ORDERS ARE SHIPPED VIA ROYAL MAIL, FEDEX OR INTERLINK EXPRESS...WHEN YOUR ORDER DOES SHIP WE WILL STATE WHICH COURIER WE HAVE USED FOR TRACKING REFERENCE.

 

RETURNS POLICY

WE UNDERSTAND THAT YOU MAY NEED TO RETURN AN ITEM FOR REFUND OR EXCHANGE. IF THIS IS THE CASE PLEASE GET IN CONTACT AND WE WILL ADVISE OF THE NEXT STEPS FORWARD. WHEN RETURNING A PRODUCT, THE ITEM MUST BE UNUSED, IN ITS ORIGINAL (UNOPENED) PACKAGING (WITH ANY SEAL OR SHRINK-WRAP INTACT), WITH ANY ORIGINAL LABELS STILL ATTACHED. PLEASE ENSURE THE ITEM HAS BEEN CORRECTLY PACKAGED WITH OUTER PACKAGING, JUST LIKE UPON RECEIPT.

WE DO  ACCEPT RETURNS ON MOTORCYCLE HELMETS.

WE WILL REFUND MONEY IN FULL FOR ANY PRODUCT RETURNED TO US IN ACCORDANCE WITH THE TERMS OF THIS RETURNS POLICY, EXCLUDING THE ORIGINAL DELIVERY CHARGES AND EXCLUDING THE COST OF RETURNING THE PRODUCT BACK TO OURSELVES, UNLESS WE DELIVERED THE PRODUCT TO YOU IN ERROR OR THERE IS AN ISSUE WITH THE PRODUCT RECEIVED. WE ARE UNABLE TO PROCESS REFUNDS OR EXCHANGES IF WE HAVE NOT RECEIVED THE ORIGINAL PRODUCT BACK. WE ACCEPT NO LIABILITY FOR RETURNED GOODS UNTIL THEY ARE DELIVERED TO OURSELVES, THAT BEING SAID WE WOULD RECOMMEND SENDING ANY ITEMS BACK TO US USING A SIGNED FOR SERVICE.

ANY PRODUCTS RETURNED TO US FROM OUTSIDE THE UNITED KINGDOM, THIS MESSAGE SHOULD BE DISPLAYED ON THE ACTUAL PACKAGE AND CUSTOMS INVOICE 'MAIL ORDER GOODS FOR EXCHANGE / DO NOT CHARGE DUTY'.

  • Condition: Neu
  • Type: EXHAUST BAFFLE
  • Brand: Smartpartz
  • Manufacturer: SMARTPARTZ
  • MPN: SPZVHBR

PicClick Insights - Smartpartz Hard Core Baffles For Vance And Hines Big Radius 2 Into 2 Exhaust PicClick Exklusiv

  •  Popularität - 18 Beobachter, 0.1 neue Beobachter pro Tag, 341 days for sale on eBay. Super hohe beobachtend. 29 verkauft, 0 verfügbar.
  •  Bestpreis -
  •  Verkäufer - 13.710+ artikel verkauft. 0.2% negativ bewertungen. Großer Verkäufer mit sehr gutem positivem Rückgespräch und über 50 Bewertungen.

Die Leute Mochten Auch PicClick Exklusiv