Nextbase 112 212 GW Hard Wire Dash Cam DashCam ADHESIVE WINDSCREEN MOUNT BRACKET

Verkauft Siehe ähnliche Artikel EUR 14,04 Sofort-Kaufen, EUR 6,73 Versand, 30-Tag Rücknahmen, eBay-Käuferschutz
Verkäufer: stealthmounts ✉️ (16.969) 99.4%, Artikelstandort: Rivenhall, Essex, GB, Versand nach: WORLDWIDE, Artikelnummer: 142232200454 Nextbase 112 212 GW Hard Wire Dash Cam DashCam ADHESIVE WINDSCREEN MOUNT BRACKET.
Stealth Mount for Nextbase Dash Cams
Designed to fit Nextbase 112, 212, 312GW, 412GW and 512GW (does not fit 101, 202, 402G, 512G etc - see sellers other items or link below) This low profile mount does NOT have a built in GPS receiver. This is not a dashcam - it's a low profile mount for a dash cam. Dash cam not included.

This is a great upgrade (or even necessity) for Nextbase dash cam's that come with the "Click & Go Powered Magnetic GPS Mount" (with sucker).

The standard 'sucker' mount is big and hangs the camera low and in your field of view.

The Stealth Mount is very low profile yet allows full adjustment, it allows you to mount the camera up high and out of view... it's much neater. It does not have a GPS receiver/antenna. This mount is intended for discrete and permanent installation rather than frequent removal. GPS: This mount replaces the standard bracket which has the GPS receiver, so no GPS function. If you want GPS functions, you'll want this version instead: https://www.ebay.co.uk/itm/132868297271

Click here for other Nextbase dashcam mounts

Free UK delivery and low cost international delivery available.

Free Adhesive Pad - Top Quality 3M VHB

Designed to fit
Designed to fit Nextbase 112, 212, 312GW, 412GW and 512GW (does not fit 101, 202, 402G, 512G etc - see sellers other items or link above) This low profile mount does NOT have a built in GPS receiver

The Stealth Mount is easy to fit and works with your normal cable (which plugs into the top of the camera). This mount is intended for discrete and permanent installation rather than frequent removal, which the standard one is designed for with it's magnetic mount.

The Stealth Mount is much lower profile and neater!

Note: The Stealth Mount does not have a GPS antenna. This does not affect the camera other than that it won't get a GPS signal. If you require GPS (location/speed) logging then don't buy this mount, but if you have the dash cam for recording video, you'll love the low profile mount.

How to install

Simply slot into the top of the camera, position and stick to your windscreen (or rear screen).

Tips

Make sure your windscreen glass is thoroughly clean and dry before sticking on the mount. An alcohol wipe is included and must be used - make sure it's clean and no grease - so don't touch the glass where the mount is going with your fingers. The glass must not be cold.

Do not adjust the camera position holding the camera - adjust the mount itself, forcing it from the camera may break the clip - do most adjustment before fitting the camera.

The 'ball' joint holds the camera in place and lets you adjust it up/down and tilt, but we recommend you use a small dot of glue (such as superglue) once you've got the position right to fix it in place if required. It's quite firm, but this locks it. If it's too firm, move slightly left to right, that will loosen it up.

If you wiggle it a lot or change position a few times the ball joint's fit will loosen as the plastic wears (still holds fine, just easier to move about) - this is normal and why we recommend a dot of glue.

The Stealth Mounts come with a free high quality adhesive pad so it's a great way to mount the camera and much neater than a 'sucker'. You get one, please follow the instructions so it sticks.

3D Printed

The mount is 3D printed with tough ABS, 3D printing technology makes this product possible.

Shown here with the standard 'sucker' mount vs the Stealth Mount (right)

The story...

I came up with the idea because I needed a way to mount my own dash cam neatly and without a big ugly bracket. The Stealth Mount is a great upgrade and makes the camera look much better.

These take several hours to print on a fairly expensive lump of 3D Printer, not to mention the time involved in perfecting the design, running the printers, postage, packing and the eBay/PayPal fees.

The design is subject to minor changes such as tweaks and improvements over time (so the latest version may very slightly from the photos but it does the same or better job).

Please send me a message if you have any questions!

Guaranteed and with Warranty The mounts are guaranteed to fit the stated product produced by the original manufacturer - if they don't (they will, but, this is the guarantee), they will be replaced (just send a photo) or refunded when returned. Should a mount break during normal use within 30 days, a replacement for the broken mount will be provided free of charge (just send a photo), this is very rare, less than 1% of mounts (fewer than 1 in 100) breaks due to either the user being a bit heavy handed or a bad print layer which can be hard to spot until they're used under load. Just send a message if this happens. Please ensure you fit the mount carefully and securely, no responsibility is accepted for anything mounted in the mount and the maximum responsibility is for the original purchase value of the mount. It is your responsibility to make sure you have correctly fitted the mount, the item being secured is securely held and the mount itself is in good condition.

The warranty does not cover: The free adhesive pad because if it's not stuck to clean, warm glass (not freezing cold), it won't stick - we can't help that, and if that happens you need to buy or obtain a new adhesive pad. The warranty also does not cover breaking the mount by force, such as holding camera and adjusting, causing too much leverage on the lug and snapping it off.

Any issues or queries please send an eBay message - don't leave negative feedback or open a case, there is no need and I can help you much quicker if you just send a message.

Mount Only Just to be clear, no dash cam is included, or any other kind of mount (eg sucker) or cables, you're buying the Stealth Mount to fit your own dash cam as pictured. Registered Design A lot of time has been invested to perfect this design. This is a registered design (filed officially with the Intellectual Property Office) and is protected as such, as well as normal copyright law. Please send a message if you wish to enquire about licensing. Thank you.

Thanks for looking and thanks for supporting UK micro-scale manufacturing!
  • Condition: Neu
  • Country/Region of Manufacture: United Kingdom
  • Brand: StealthMounts
  • Unit Quantity: 1

PicClick Insights - Nextbase 112 212 GW Hard Wire Dash Cam DashCam ADHESIVE WINDSCREEN MOUNT BRACKET PicClick Exklusiv

  •  Popularität - 148 Beobachter, 0.1 neue Beobachter pro Tag, 1.435 days for sale on eBay. Super hohe beobachtend. 939 verkauft, 0 verfügbar.
  •  Bestpreis -
  •  Verkäufer - 16.969+ artikel verkauft. 0.6% negativ bewertungen. Großer Verkäufer mit sehr gutem positivem Rückgespräch und über 50 Bewertungen.

Die Leute Mochten Auch PicClick Exklusiv