〖DE〗3 Axis CNC Kit Nema23 Stepper Motor 425oz-in+Driver+USB Mach3 Card+36V Power

EUR 260,61 Sofort-Kaufen, Kostenloser Versand, eBay-Käuferschutz
Verkäufer: powace08 ✉️ (4.091) 99.3%, Artikelstandort: Frankfurt, DE, Versand nach: EUROPEAN_UNION, GB, CH, Artikelnummer: 276030071832 〖DE〗3 Axis CNC Kit Nema23 Stepper Motor 425oz-in+Driver+USB Mach3 Card+36V Power. 〖DE〗3 Axis CNC Kit Nema23 Stepper Motor 425oz-in+Driver+USB Mach3 Card+36V Power  For CNC Router Milling Engraving Machine                     

We will Ship from Germany warehouse to Below Europe Countries

Austria Belgium Bulgaria

Czech Republic

Croatia

Denmark Estonia
Finland France Germany Greece Hungary Ireland Italy
Latvia Lithuania Luxembourg Netherlands Poland Portugal Romania
Slovakia Slovenia Spain Sweden UK Malta  

3 Axis Kit:


Package include:
  • 3 x CW5045 stepper motor driver

  • 3 x 23HS2430B Nema23 stepper motor  (Dual shaft)

  • 1 x 400W 36V 11A switching power supply

  • 1x 4 Axis Mach3 USB Motion Card STB4100 V2.1

  • 1x cable & CD


CD include user manual and mach3 software

1. Stepper Motor

23HS2430B Nema23 Stepper Motor

  • Motor Type: Hybrid
  • Step Angle: 1.8 degree
  • Holding Torque: 425oz.in/2.8Nm
  • Rated Current/phase: 3A
  • Phase Resistance: 1.6ohms ; Inductance: 6.8mH+/-20%(1KHz)
  • Frame Size: 57 x 57 x 112 mm
  • Body Length: 112mm
  • Number of Leads: 4
  • Weight: 1.66kg
  • Front shaft 8mm dia and 21mm length,back shaft 8mm dia and 11mm length
  • Our motor is made of solid and durable metal. The perfect combination of rubber and rotor makes the internal structure more stable, and also reduces the vibration and noise when the engine runs.
  • The motor runs more quietly, with a high torque of 425oz in. The coil uses pure copper enamelled wire to ensure that long-term operation will not lead to excessive engine temperature.
  • The rotor surface is coated with high-quality epoxy resin adhesive to isolate the adsorbed burrs on the rotor surface, more stable magnetic field and longer service life of motor.
  • Stepper motor's red wire connect to driver's A+ port
  • Stepper motor's green wire connect to driver's A- port
  • Stepper motor's yellow wire connect to driver's B+ port
  • Stepper motor's blue wire connect to driver's B- port

Technical Specifications

General Specification:

Step angle accuracy:+ -  5%(full step,not load)

Resistance accuracy: + - 10%

Inductance accuracy:+ - 20%

Temperature rise: 80deg Max(rated current,2 phase on)

Ambient temperature ----------—20deg  ----  +50deg

Insulation resistance:100ohm  Min,500VDC

Insultion Strength--------500VAC for one minute

Datasheet(23HS2430B,Front shaft 8mm dia and 21mm length,back shaft 8mm dia and 11mm length,425 oz-in or 28kg.cm holding torque)




Wiring:

Red:      A+

Green:   A-

Yellow:  B+

Blue:     B-



2. CW5045 high microstep stepper motor driver

DC power input type:24V~50VDC Output current:1.3,1.8,2.3,2.7,3.2,3.7,4.2,4.5A Mircostepping:1(1.8º),1/2,1/4,1/8,1/16,1/32,1/64,1/128,1/256;1/5,1/10,1/25,1/50,1/125,1/250 Protect form : Overheated protect, lock automatic half current ,error connect protect Working environment:Temperature-15-40deg Humidity<90% It is fit for NEMA17-23 two and four phase stepper motors whose current is
small than 4.5A,it also can fit for small length NEMA34 two and four
phase stepper motors.

  • GND:DC power cathode
  • VCC+:DC power positive pole
  • GND:DC power cathode
  • A+、A-:Stepping motor one winding
  • B+、B-:Stepping motor other winding
  • PUL+、PUL -:Stepping pulse input+5V
  • DIR +、DIR-:Stepping motor direction input
  • ENA+、ENA- : no need to connect

  • Dimensions: 118mm×76mm×33mm
  • Shape design is convenient for installation
  • Working environment: Temperature -15-40℃ Humidity<90%

  • High-performance motor driver
  • Mircostepping: 1(1.8°), 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128, 1/256, 1/5, 1/10, 1/25, 1/50, 1/125, 1/250
  • DC power input type: 24V~50VDC
  • Output current: 1.3A-4.5A
  • Phase: 2 phase
  • Weight:<300g
3. Mach3 USB Motion Card STB4100 V2.1

4 Axis USB Mach3 control board

  • Need use external 24V DC  power supply to isolate USB and external port, and to make the system more stable.
  • Support for connecting electronic handwheel ;
  • MCU model: three generation 32-bit STM processor
  • Communication plug-in: RnR motion control card - ECO-2.0

  • 4 general-purpose isolated relay drive output interface, can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps and other device .
  • 4 general-purpose inputs, you can connect the limit switch, estop switch, probe , back to zero and other device.

  • Support for 4 Axis linkage, you can connect four stepper motor drives or servo drives;
  • Maximum step-pulse frequency is 100KHz ,which is suitable for the servo or stepping motor;
  • Have 0-10V signal output ,you can use mach3 software to control the spindle motor speed.
  • One status LED , indicate connection status on the board.

Features: 1. Support for 4-axis linkage, you can connect four stepper motor drives or servo drives; 2. Maximum step-pulse frequency is 100KHz,which is suitable for the servo or stepping motor; 3. 4 general-purpose opto-couplers isolation input : can connect the limit switch, emergency stop switch, auto tool zero, home switch etc. 4. Support for connecting electronic handwheel; 5. Have 0-10V signal output , you can use mach3 software to control the spindle motor speed. 6. 4 general-purpose isolated relay drive output interface, can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps or other device; 7. 1 status LED, indicate connection status on the board

Mach3 USB Motion Card STB4100 V2.1 1.2.Software license application: Copy license files “Mach1Lic.dat” from “mach3 software folder”,to C:\Mach3 Cover the original file,Reset Computer(must reset the computr,please don't open the software dircetly!) Way above the license for DIY or study purposes only, not for commercial use. 1.3. Installation the software of the USB motion card: This USB motion card does not need install any USB driver,Windows2000/XP/Windows7/8/10,can directly identify. 1.3.1 Connecting the USB cable to the PC and the motion card: The first installation of motion control card, take about 10s, when the green led lights on motion control card, indicating that the connection is successful, return the following tips when you install on your computer

Feature:

1. The output current is steplessly adjustable to meet your various application requirements.

2. Automatic half-flow function. It is also equipped with an automatic half-flow switch, which is easy to use.

3. Use 6N137 high-speed optical lotus to ensure high speed without losing step.

4. The subdivision setting instructions are printed on the back of the board.

5. Adopt enlarged radiator, good heat dissipation.

6. With output short-circuit protection function, worry-free use.

7. Adopting the common anode input mode, there are two input terminals, the wiring is more convenient.

Parameters:

1. The working voltage is DC 10V-45V. It is recommended to use switching power supply DC32V for power supply.

2. Adopt 6N137 high-speed optical lotus root to ensure high speed without losing step.

3. Using Toshiba's new high-current, high-voltage TB6600HG brand new original chip, with low-voltage shutdown, overheating shutdown and over-current protection circuits, and short-circuit protection added compared to TB6560.

4. The rated maximum output reaches: ±4.5A.

5. Suitable for 42, 57, 86 two-phase/four-phase/four-wire/six-wire stepper motors within 4.2A.

6. Automatic half-flow function.

7. Subdivision: full step, half step, 1/4 step, 1/8 step, 1/16 step, maximum 16 subdivisions.



Please strictly follow the instructions and warnings before using this product:

  • It is recommended that the limit switch and emergency stop switch must be installed first  and can be used normally.
  • The output singal of theelectronic handwheel must be 5V , more than 5V output will damage the hand wheel interface.
  • This interface can output 0-10V analog signals
  • USB interface is applicable to any netbook, notebook, desktop, tablet and other PC compatible computers with USB interface.
  • This control board does not require any drivers  to be installed,as long as Mach3  can run, the control card can be used;
  • Support computer system: Windows 2000/ XP / Windows 7/8/10
  • The inverter interface (AVI +, AVI-) is isolated from the computer and the main control circuit, and has strong anti-interference ability, no interference signal will be introduced due to the introduction of external strong electrical equipment.
  • Whether frequency converter is supported: Yes
  • Support PWM : Yes
  • Number of control axes: X.Y.Z.A axis

4. Switching power supply

400W,Input:100-120VAC or 200-240VAC,50/60Hz,Output:48v/8.3A,single output switching power supply


5. Usage or Application


This products are widely used in engraving machine, printer, medical equipment, embroidery machine, stage lighting, textile automation, printing, packaging and other industries automation equipment.



Feedback: We maintain hightest buyer ratings > Positive Feedback will be much appreciated from you. > Any dissatisfaction,please contact us immediately! > Please do not leave neutral or negative feedback before we help you out. Returns: > Defect: We will fully refund or send you a new replacement,please contact and return within 30 days. > Dissatisfaction: Please contact within 3 days, we will fully refund, after got your returned goods. > Missing parts/Q'ty: Please contact us immediately,for a new package arranged,or a partial refund issued. Contact us: > If have any question, Please contact us by ebay message before leaving neutral, negative feedback or open any dispute, we will reply within 24hours, ensure that help you solve the problem, make you satisfied.

  • Condition: Neu
  • Holding torque: 425 Oz-in/280Ncm
  • Angebotspaket: Nein
  • Size: 57x57x112mm
  • Port: USB
  • Driver: CW5045,24-50V
  • Power supply: 400W,36V/9.7A
  • Name: 3 Axis Nema23 Stepper motor USB MACH3 CNC Kit
  • Ausländisches Produkt: Nein
  • Step Angle(degrees): 1.8deg
  • Marke: RATTM MOTOR
  • Type: Hybrid
  • Modifizierter Artikel: Nein
  • Herstellungsland und -region: China
  • Model: 23HS2430B/CW5045
  • Shaft: Dual Shaft
  • Driver Microstep: 256 microstep

PicClick Insights - 〖DE〗3 Axis CNC Kit Nema23 Stepper Motor 425oz-in+Driver+USB Mach3 Card+36V Power PicClick Exklusiv

  •  Popularität - 9 Beobachter, 0.0 neue Beobachter pro Tag, 207 days for sale on eBay. Super hohe beobachtend. 5 verkauft, 3 verfügbar.
  •  Bestpreis -
  •  Verkäufer - 4.091+ artikel verkauft. 0.7% negativ bewertungen. Großer Verkäufer mit sehr gutem positivem Rückgespräch und über 50 Bewertungen.

Die Leute Mochten Auch PicClick Exklusiv