Verkäufer: pennoir1000 (82) 100%, Artikelstandort: Plymouth, Devon, Versand nach: GB und viele andere Länder, Artikelnummer: 152386004273 Selling my British made classic Joemeek VC1Q channel strip. Great sounding mic pre/ DI, opto compressor, EQ and unique enhancer for added top end sparkle. Has been used in non smoking studios only and has been checked before removing from the rack. Some slight 'rack rash' which is not noticeable when it is racked up. Any questions please ask. TECHNICAL SPECIFICATIONS MICROPHONE INPUT • XLR Input 3kOhm approx. to suit 200-Ohm microphones. • Transformer balanced and floating. • Switchable 48V phantom power. • Input level from -70dB to 0dB • Push button MIC/LINE switch with LED indicator for 'line'. • Push button 48V phantom supply switch with LED indicator. LINE INPUTS • XLR input 10K impedance floating balanced. • Instrument input 150K impedance unbalanced. OVERLOAD MARGIN • 30dB on Mic and Line inputs in normal operation. GAIN • Line in -6dB to 24dB • Instrument in 0dB to 35dB • Mic in 15dB to 70dB • Insert gain 10dB NOISE • Line in at least 80dB below operating level • Mic in at least 125.5dB below input at 50dB gain 20Hz to 20kHz across 200 Ohm load resistor. Self noise approx -132dB HARMONIC DISTORTION • Generally within 0.01% rising to approx. 0.14% at 4dB above nominal output level. 2nd harmonic predominant. AMPLITUDE FREQUENCY RESPONSE • Line in 6Hz to 20kHz within 0.5dB • Mic in 8Hz to 20kHz within 1dB • High pass filter 3dB down at 75Hz, 12dB per octave. FILTER • Push button high-pass filter switch (and indicator) operates at 75Hz at 12dB per octave. OUTPUTS • High level balanced 50 Ohm +4dBu for 0VU (variable) • Max. balanced output approx. +26dBu • Insert, Tip and Ring jack socket. 400 Ohm -10dBu output 22k Ohm input. COMPRESSOR • Photoresistive servo operated • Ratio minimum approx. 1.5 to 1 • Ratio maximum approx. 8 to 1 (position 5) • Attack time 1mS min. 7mS max. (variable) • Release time 200mS min 3S max. (variable) ENHANCER • Performance details not released. • VC1 Q version allows harmonic enhancement and de-ess effect. • Controls for Q, Drive and effect mix. MEEQUALIZER • Shelving high and low frequency controls (8K and 100Hz) • Mid frequency cut/boost control • Mid frequency center control (1 kHz - 4kHz) • Bypass switch with indicator • Cut/boost levels approx. 15dB POWER • 3.4 Watts. • IEC socket for power cable. • Reversible fuse holder for 230VAC and 115VAC power input. HOUSING • 2U rack mounting, totally enclosed aluminum case. • depth approx. 250mm. • weight 1.5Kgs.