High Energy Electronic
Ignition Kit for Bosch
1 Piece, Right Hand Points Bosch Distributor
SKU: K17H
- High Energy Electronic Ignition Kit for Bosch
4 Cylinder 1 piece RH Points Distributor
A High Energy Electronic Ignition Kit is
designed to be used with a higher powered
ignition coil of less than 1.4Ohm resistance.
Suited for a vehicle that requires a more
accurate and powerful spark.
This kit is designed to replace the points and
condenser inside Bosch 4 Cylinder, Right Hand
Points Distributors.
Bosch distributors are either 1 piece or 2 piece
construction, and have Left Hand or Right Hand
Points Sets.
This ignition kit is designed to replace a one
piece, right hand points set in Bosch 4 Cylinder
distributors.
Suitable for vacuum advance & centrifugal
advance distributors.
Distributors of this type can have the following
product numbers:
JF4, JFU4, 009, 050, SVDA, 0231, and more.
Please supply the
Bosch 0 231 numbers in order to be certain on fitment.
This distributor was fitted to a huge array of
vehicles, including cars from Audi, Alfa Romeo,
BMW, Ford, Mercedes-Benz, Porsche, Saab,
Vauxhall, Volvo, Volkswagen (Air and Water
Cooled) amongst others.
Iconic classics fitted with this distributor
include the BMW 2002, Porsche 914, and MK1
Volkswagen Golf GTI.
A Powerspark Electronic Ignition Kit is
everything you need to convert your car to
electronic ignition.
Fitting is easy and instructions are included
with the packaging, as well as available online.
Works from 6 volt to 12 volt applications.
Electronic ignition will give your classic car
better starting and smoother running.
Powerspark Electronic Ignition explained in
more detail:
The kit uses a simple magnetic trigger and
optimises dwell to provide a reliable and
consistent spark across the rev range. It is
easy to install and maintenance free.
Each kit comprises a metal bracket where the
electronic module is mounted, trigger ring and
all wiring. The new electronic bracket mounts
exactly where the points and condenser baseplate
sit.
The kit connects directly to the coil using the
wires provided, red to the positive side and
black to the negative side. The ignition kit
will automatically shut down if the ignition is
left switched on without the engine running to
prevent component damage.
Powerspark Electronic Ignition Kits are designed
to work with a coil resistance above 1.5 ohms,
typically 3.0 ohms.
Do I need a High Energy Electronic Ignition
Kit?
Some performance coils operate at a lower
resistance and will need the High Energy
electronic ignition kit.
Our High Energy Electronic Ignition Kits are
designed to be used with a lower coil resistance
of less than 1.4ohms, suitable for a vehicle
that requires a more accurate and powerful
spark.
Full fitting instructions are included with your
kit, and plenty more instructions can be found
on our blog.
