BuildTak 3D Printing Build Surface BT08x08 8" x 8" 203 mm x 203 mm Black (2)

Verkauft Siehe ähnliche Artikel EUR 26,03 Sofort-Kaufen, EUR 6,23 Versand, 14-Tag Rücknahmen, eBay-Käuferschutz
Verkäufer: lemon.digital ✉️ (138) 0%, Artikelstandort: Littlehampton, GB, Versand nach: WORLDWIDE, Artikelnummer: 252705716323 BuildTak 3D Printing Build Surface BT08x08 8" x 8" 203 mm x 203 mm Black (2).

Product Description

BuildTak is a thin, durable plastic sheet that adheres to the print bed of FDM (fused deposition modelling) 3D printers to provide an ideal surface for 3D printing. It replaces the need for blue masking tape and/or polyimide films such as Kapton. Composed of high quality, heat-resistant raw materials, BuildTak provides a stable build platform for 3D printed objects to adhere to while allowing for a clean, easy removal of completed builds. BuildTak Offers The Following Benefits ; Works great with ABS, PLA and more without the need to change the surface. And no more pre-treatments such as hairspray or acetone slurry!; Easy installation to the bare print bed and clean removal without adhesive residue.; Durable and with optimal care can last for many hours of use while providing extended protection to the original print bed surface.; Creates an optimal bond between the 3D printed object and the build surface for the duration of the print while preventing curling. When builds are complete, the 3D printed object can be cleanly removed with minimal prying or scraping.; Works with ABS, PLA, HIPS, PET+, Brick, Wood & Flexible (TPE) filaments; additionally we have had success with getting nylon and t-glase (PETT) to adhere when used with a thin layer of washable glue stick on the BuildTak surface; Installs much easier than masking tape or films typically used and with fewer chances of air bubbles; Protects build plate; Heat resistant and durable, can be reused for many consecutive builds and you can use different filament materials without the need to change the printing surface; Creates an optimal bond between the 3D printed object and build surface that maximizes the chances your object will be held in place for the duration of the print and then allow for clean and easy removal of the object from the build surface.

Ideal build surface for  FFF   3D printers. Works with ABS,  PLA , HIPS, PET+, Brick, Wood & Flexible ( TPE ) filaments; additionally we have had success with getting nylon and t- glase   ( PETT ) to adhere when used with a thin layer of washable glue stick on the  BuildTak   surface. Installs much easier than masking tape or films typically used and with fewer chances of air bubbles.  Protects build plate Heat resistant and durable, can be reused for many consecutive builds and you can use different filament materials without the need to change the printing surface. Creates an optimal bond between the 3D printed object and build surface that maximizes the chances your object will be held in place for the duration of the print and then allow for clean and easy removal of the object from the build surface. Easy to cut with scissor to match you build plate.

The patent heat-resistant composition was developed to withstand the typical temperatures of heated beds (110-125 °C). 

More information

When using the BuildTak Print Surface the board must be calibrated again. The components may adhere to the print bed if the distance is not correct. Please find the instructional video below. BuildTak recommends using a nozzle height of about 0.2 to 0.25 mm. If the first layer does not adhere well, gradually reduce the distance. 

Once the correct distance is found, you can use the BuildTak printing surface for hundreds of hours.

BuildTak - The Ideal 3D Printing Surface

BuildTak Installation Guide

Please use correctly instruction of use,  to prevent damage to the product. 

3D Prining Surfaces are checked before packing and dispatching.

Damaged product by customer is not refundable.

They are packaged in a hard back envelopes.

  • Condition: Neu: Sonstige (siehe Artikelbeschreibung)
  • Condition: Repacked
  • Brand: BuildTak
  • MPN: BT08x08
  • Type: Print Bed Coating
  • To Fit: 3D Printer
  • Manufacturer warranty: None
  • Country/Region of Manufacture: Belgium
  • EAN: 0099461338623

PicClick Insights - BuildTak 3D Printing Build Surface BT08x08 8" x 8" 203 mm x 203 mm Black (2) PicClick Exklusiv

  •  Popularität - 12 Beobachter, 0.1 neue Beobachter pro Tag, 120 days for sale on eBay. Super hohe beobachtend. 25 verkauft, 0 verfügbar.
  •  Bestpreis -
  •  Verkäufer - 138+ artikel verkauft. 0% negativ bewertungen. Guter Verkäufer mit positivem Feedback und gute Bewertung.

Die Leute Mochten Auch PicClick Exklusiv