Bei Rückfragen Toscha 0212/2241004 Thomas Schaper
HDD / SSD Caddy and Cable Kit for the HP Envy m7-n000 m7-n100 series. Including the Touch series.
IMPORTANT!: not compatible with other generation ENVY m7 Series laptops . If you are unsure of what laptop series you have, please check the bottom of your laptop or check underneath the battery (remove the battery to see the series model number). The model number should look something like this "m7-nxxx".
This "cable and caddy hardware kit" will enable you to add a 2nd hard drive or SSD to your Laptop. Your Envy 17 m7-nxxx series laptop comes from the factory with two internal 2.5" drive bays. All you need to add a 2nd HDD or SSD is the correct ribbon cable and hardware kit. (compare to 813796-001 and 813795-001). Our kit contains everything you would need to install a 2nd 2.5" drive, other than the drive. This product includes the caddy / bracket, ribbon cable, four drive screws and three mounting screws as shown in the photo below.
Note: This caddy hardware and cable kit is for HP Envy m7-nxxx series laptops. If you are unsure of what laptop series you have, please check the bottom of your laptop or check underneath the battery (remove the battery to see the series model number). This is not an HP Original Part. Newmodeus manufactures this part to meet or exceed OEM specifications. Hard drive and SSD not included. (Disque dur SATA cable pour HP Envy, festplatte kabel).
Compatible with the following HP Envy models:
M7-N011DX M1W00UA M1W00UAR M7-N014DX M1W04UA M1W04UAR M7-N101DX M1W07UA M1W07UAR M7-N103DX M1W05UA M1W05UAR M7-N109DX M1W11UA M1W11UAR M1W11UA