Description
Sculpfun S9 Laser Engraving Machine
Features:
1.
90W effect laser beam shaping technology: S9 uses the latest 5.5W laser
beam shaping technology diode laser, it has an ultra-fine 0.06mm sharp
laser focus, with super cutting penetration and precision, he can cut up
to 15mm thick wood, 10mm acrylic, directly engrave ceramics and 304
stainless steel, this is almost beyond the effect of 90W CO2 laser.
2.
Fast focusing design: S9 has the fastest focus design. The S9 laser
combines a fixed focus lens and a sliding design. You only need to slide
the laser and tighten the screws to complete the focusing. This makes
it very easy to use the laser .
3.
Solid and easy-assembly structure design: The full-metal structure
design makes the machine extremely solid, and it improves the accuracy
of engraving. The whole structure is designed for easy-assembly, and the
assembly can be completed in 10-20 minutes. The structural frame is
very durable and remains open to upgrade. During use, you can keep the
frame and replace with other new lasers. Or replace longer metal beams
to expand the engraving area.
4.
New eye protection design: The laser filter cover filters 98% of the
ultraviolet light to the eyes. You and the people around you can watch
laser engraving without wearing goggles. At the same time it can prevent
animals from catching the laser spot.
5.
Wide compatibility: The machine is compatible with various mature
engraving software, such as LaserGRBL, LightBurn, Benbox,
GrblController, LiteFire, supports PWM mode engraving, supports Windows
system, MAC system (LightBurn), and engraving file format Support JPG,
PNG, DXF, SVG, AI, G-code, NC, BMP, etc.
6.
Safe design: The machine is equipped with a very convenient power
switch, which is not available in others. Fixing holes are reserved on
the four feet and the body structure to facilitate fixing the machine
and the data cable.
7. A4 steel pad: The free A4 size steel pad can protect the table from laser damage. Isolate fire hazards.
8.Square
measuring ruler: X-axis and Y-axis contain precise scale lines, which
is convenient for you to measure the size of engraving objects quickly.
The 410x420mm large-area engraving interval can meet your various
engraving needs.
Product information:
Product model: SCULPFUN S9
Engraving size: 410*420mm
Engraving/cutting material:
Engraving materials: wood, paper, cardboard, plastic, white, PCB board, aluminum oxide, 304 Stainless steel, ceramic,dark stone
Cutting material: wood, acrylic, cardboard, fabric, bamboo, plastic board, KT board
Laser effect power: 90W (cutting effect compared to 90W CO2 laser)
Machine Electricity Power: 30W (It has nothing to do with cutting or engraving performance,just electricity consumes)
Diode laser power: 5.5-6W (Please note that this is light energy and not electric energy)
Laser wave length 455±5nm
Engraving accuracy: 0.01mm
Focusing method: fixed focus laser + sliding device
Laser
protective cover: The light filter cover on the laser protects the
user's eyes and prevents animals grabing the laser spot.
Operating
software: LaserGRBL, LightBurn, LaserGRBL, LightBurn, Benbox,
GrblController, LiteFire, support Windows system, support MAC system.
Supported file formats NC, BMP, JPG, PNG, DXF and other image formats.
Data transmission method: USB connection
Power supply: International universal standard power input: 100-240V AC, 50/60HZ output: 12V 5A
Equipment net weight: 3.0kg
Package weight: 4.4kg
Packing size: 615*345*130mm
Certification: CE FCC RoHS FDA IEC
SCULPFUN S9 engraving machine packing list:
1× X axis assembly
2× X shaft
2× Y shaft
1×control box module set
3×support feet
1×laser module set
1×12V 5A power adapter
1×power adapter
1×USB cable
Step 1~5 Screw installation package
2× belt
1× T-shaped M5 screwdriver
1× L-shaped M4 screwdriver
1× L-shaped M3 screwdriver
10×Tie
1× 8-10mm nut wrench
1× brush
1× Laser goggles
1× 10x10cm wood chip 3mm thickness
1× 10x10cm wood chip 10mm thickness
1× A4 size steel desktop protection pad
Note:
●For detailed machine instructions, please refer to the manual for parameter settings.
●When
operating the laser engraving machine, please install the laser
protective cover. If it is not installed, you need to wear goggles.
● Please do not touch the laser emitter with your hand, or it may burn your hand.
● Please avoid strong impact on the machine.
● Children under 14 are not allowed to use this product and children over 14 need adult supervision.
●
The light engraving machine can not be directly applied to any mirror
reflecting object, which may cause injury to the operator or burn the
laser.
SCULPFUN S6/S9 ngraving area expansion kit
Main feature:
1.
Quickly expand the engraving area of SCULPFUN S6/S9 in low price : By
replacing the frame shafts of S6/S9, it can quickly obtain a huge
engraving area of 410x950mm(226% area of standard S9). Meet the needs of
large-area engraving users.
2.
No additional processing need, directly use: The extension shaft is
standardized processing, it can be directly assembled on the S6/S9
engraving machine without any other additional processing. There are
other necessary accessories in the product list, including extension
cables, belts, and screws. No need to purchase any additional
accessories.
3.
High-precision production and quality: The extension shaft and cable
have undergone rigorous testing , so that it keeps the same accuracy and
stability as the standard S6/S9 engraving machine. Guarantee
high-quality engraving and cutting.
Product model: SCULPFUN S6/S9 engraving area expansion Kit
Engraving enlargement size: 410x950mm
Package weight: 1.2kg
Packing size: 114*5*10cm
SCULPFUN S9 Expansion Kit Packing List:
2× Y-axis extension shaft
1× extension cable
4× 1.3m extension belt
4× T type screw assembly
1× installation manual
SCULPFUN S9 90W effct laser module laser head
Main Feature:
1.
Widely compatible design: The SCULPFUN laser module has a clever and
widely compatible structural connection device, which can be well
adapted to different laser engraving machines, laser cutting machines,
3D printers, CNC milling machines, etc. It can be installed on a variety
of brand machines, such as SCULPFUN, ATOMSTACK, ORTUR laser engraving
machine, or other DIY type machines.
2.
90W effect laser beam shaping technology: S9 uses the latest 5.5W laser
beam shaping technology ,the effect of this technique is to get a
super-high-density energy laser beam , it is more than just a thinner
focus, the entire beam is very thin. It has an ultra-fine 0.06mm sharp
laser focus, with super cutting penetration and precision, he can cut up
to 15mm thick wood, 10mm acrylic, carve ceramics and stainless steel,
this is almost beyond the effect of 90W CO2 laser.
3.
Fast fixed focus design: The S9 laser module has the fastest focusing
design on the market. It combines a fixed focus lens and a sliding
design. You only need to slide the laser and tighten the screws to
complete focusing. This makes the use of the laser very simple. Using it
on different machines does not affect its sliding fixed focusing
function.
4.
Circle eye protection cover design: The laser filter cover filters 98%
of the ultraviolet light to the eyes. You and the people around you can
watch laser engraving from all angles without wearing goggles. At the
same time, it can prevent animals from catching the laser spot.
5.
General 12V/PWM modulation board: It uses a common 12V/PWM modulation
board, which can be adapted to common GRBL or CNC motherboards. You can
view product pictures for details.
Product model: SCULPFUN S9 Laser module
Applicable
machines: laser engraving machines such as SCULPFUN, ATOMSTACK, ORTUR,
ELEKSMAKER, or DIY 3D printers, CNC machine tools.
Engraving materials: paper, paper, cardboard, plastic, white, PCB board, alumina, stainless steel, black metal, ceramic
Cutting material: thin board, acrylic board, cardboard, non-woven fabric, bamboo, some plastic board;
Laser effect power: 90W (cutting effect similar to 90W CO2 laser)
Laser output power: 5.5-6W (light energy)
Laser wave length 455±5nm
Laser type and fixed focus method: fixed focus laser, fixed focus through 20mm measuring column
Laser
protective cover: the ring-shaped violet filter cover protects the
user's eyes and prevents animals, etc. from contacting the laser spot.
Laser shell material: aluminum alloy
Laser circuit board parameters:
Circuit Board Size: 40*40mm
Circuit Board:12V/PWM modulation board
Input voltage: 12V
Max Input of laser module:12V 3A
Wire Rod:HY2.0, 3Pin terminal (3-core cable, A: PWM +, B: GND, C: VCC ).
Fan:12V 0.15A 4020 fan
Fan speed: 10000 rpm
Operating temperature: -20 ℃ to 70 ℃
Package weight: 0.5kg
Packing size: 11*12*18cm
SCULPFUN S9 Laser module packing list:
Laser head*1
Multi-function structural connection device *1
20mm measuring column*1
Screws and tool kit*1
Precautions:
●For detailed machine instructions, please refer to the manual for parameter settings.
●Before
installing and using the laser, you should understand the adaptability
and the maximum input voltage and current to avoid damage to the laser.
●Do not touch the laser with your hands, otherwise you may burn your hands.
●Please avoid strong impact on the machine.
●It is forbidden for children under 14 years old to use this product. Children over 14 years old need adult supervision.
●Do not apply the laser directly to any specular reflection object, which may cause injury to the operator or burn the laser.
300x200mm cutting Honeycomb Working
Main feature:
1.
Necessary accessories for laser cutting: After using this laser cutting
honeycomb table to cut wood, acrylic and other materials, the edges of
the wood are neat and clean, not easy to be yellowed by smoke, and you
can get a clean cutting work .
2.
Cutting through observable design: SCULPFUN honeycomb table contains a
very convenient cutting and observation design. When the laser cuts
through wood or acrylic, the metal plate at the bottom of the honeycomb
will emit a bright light, which means that the cutting has penetrated.
Solve the problem that ordinary engraving machine is difficult to judge
whether cutting through.You don’t need to calculate the number of cuts ,
just keep repeating cutting until the bottom glows, which means the
material has been cut through.
3.
Safe metal desktop protection board: SCULPFUN honeycomb Board is
equipped with a metal desktop protection board, which can protect the
table from laser damage, which is very suitable for many different diode
laser engravers.
4.
Square measuring ruler: X-axis and Y-axis contain precise scale lines
to form a right-angle measuring ruler, which is convenient for you to
measure the size of cutting objects quickly.
5.
Wide compatibility: The machine can be compatible with various mature
laser engraving machines, such as diode DIY laser engraving machine and
CO2 laser engraving machine.
6.
All-metal high flatness: SCULPFUN is all made of metal, processed by
high-precision CNC, solid structure not easy to deform, and high
flatness.
Product information:
Material: high-strength steel
Product size: 300*200mm
Product thickness: 22mm
Diameter of honeycomb mesh: 9mm
Package weight: 0.8KG
Packing size: 31x21x3cm
Packing list:
1× SCULPFUN honeycomb panel
1× 200x300mm metal desktop protection board
400x400mm cutting Honeycomb Working
Main feature:
1.
Necessary accessories for laser cutting: After using this laser cutting
honeycomb table to cut wood, acrylic and other materials, the edges of
the wood are neat and clean, not easy to be yellowed by smoke, and you
can get a clean cutting work .
2、Proper size: 400x400mm working area is suitable for most popular laser engraving machines, maximize the cutting area.
3.
Cutting through observable design: SCULPFUN honeycomb table contains a
very convenient cutting and observation design. When the laser cuts
through wood or acrylic, the metal plate at the bottom of the honeycomb
will emit a bright light, which means that the cutting has penetrated.
Solve the problem that ordinary engraving machine is difficult to judge
whether cutting through.You don’t need to calculate the number of cuts ,
just keep repeating cutting until the bottom glows, which means the
material has been cut through.
4.
Safe metal desktop protection board: SCULPFUN honeycomb Board is
equipped with a metal desktop protection board, which can protect the
table from laser damage, which is very suitable for many different diode
laser engravers.
5.
Square measuring ruler: X-axis and Y-axis contain precise scale lines
to form a right-angle measuring ruler, which is convenient for you to
measure the size of cutting objects quickly.
6.
Wide compatibility: The machine can be compatible with various mature
laser engraving machines, such as diode DIY laser engraving machine and
CO2 laser engraving machine.
7.
All-metal high flatness: SCULPFUN is all made of metal, processed by
high-precision CNC, solid structure not easy to deform, and high
flatness.
Product information:
Material: high-strength steel
Product size: 400*400mm
Product thickness: 22mm
Diameter of honeycomb mesh: 9mm
Package weight: 2.04kg
Packing size: 46*46*5.5cm
Packing list:
1× SCULPFUN honeycomb panel
1× 400x400mm metal desktop protection board
SCULPFUN Rotary Roller
Main feature:
1.
100% pre-assembled, plug and play: the machine is 100% installed in the
package, equipped with an adapter cable, and only needs to be connected
to the Y-axis wiring of the laser engraving machine to engrave
Cylindrical objects, such as pens, water bottle, etc.
2.
Huge engraving space and 4 raising feet: SCULPFUN roller base design is
lower and stable, and equipped with 4 sturdy metal raising feet, so
that it has a larger engraving diameter of 6-150mm, which can meet more
engravings. need. Metal feet are more solid than plastic feet, and the
machine is more stable when engraving.
3.
Sliding space adjustment: SCULPFUN roller adjusts the size of the space
between the two rubber rollers by sliding, and fixes the rolloer by
handscrew, which is simpler and faster than the traditional multi-stage
fixing hole adjustment.
4.
100% original scale high-precision engraving: SCULPFUN roller adopts
high friction 70A rubber shaft to prevent slipping, and the linear speed
of the rotating surface has been precisely calculated. Directly plug in
the engraving machine cable to engrave the original image in 100%
original scale. Does not enlarge or reduce the image.
5.
Wide compatibility: SCULPFUN roller is suitable for multiple engraving
software such as lightburn or laserGRBL, and it can be used directly ,
no need to set parameters in software. In addition, it can be applied to
95% of the engraving machines on the market such as SCULPFUN, NEJE,
Ortur, ATOMSTACK, etc.
6.
Free useful accessories: a free soft ruler to measure the size of
object; 4 free raising feet, which can be used to increase the height of
a variety of machines.
Product model: SCULPFUN Rotary Roller
Product introduction:
How
to use: Take out the original Y-axis motor cable of the laser engraving
machine, plug into SCULPFUN Rotary Roller , and you can start using it.
There is no need to set parameter in software, because the surface
linear speed of the roller is the same as the original Y-axis speed.
Available engraving space: cylinder diameter 6-150mm, cylinder length 0-230mm
Compatible
software: Lightburn, LaserGRBL, Benbox, GrblController, LiteFire, etc.
There is no need to set up software because the surface linear velocity
of the roller is the same as the original Y-axis velocity.
Compatible
machines: suitable for all GRBL motherboard types of engraving
machines, including SCULPFUN, Ortur, NEJE, ATOMSTACK and other engraving
machines.
Adjustment
of shaft spacing: The shaft spacing can be adjusted steplessly by
sliding, and it can be fixed by hand-tightening screws.
Product packaging :
Product Size: 27x22x5cm
Product packaging size: 34*25*9cm
Product packaging weight: 1.5KG
SCULPFUN Laser Rotary Roller packing list:
1× Roller device
1× A Type wiring
1× B Type wiring
4× raise feet
1× screw bag
1× soft ruler
1× user manual
SCULPFUN 720x720x360mm Smoke Exhaust Box
Main feature:
1.
Large working space and wide compatibility: 720x720x360mm large working
space, designed by the official SCULPFUN, suitable for almost all laser
engraving machines on the market.
2.
Super suction fan: The box is equipped with a super high-speed fan of
10000r/min, which can generate strong suction force. And more than 10m/s
suction speed can quickly exhaust the smoke from the box
3.
Modifiable box: We provide a solid frame and a powerful suction fan,
which are the main units. As for the shell, you can remove the original
shell and modify it according to your own imagination, you can choose
the material you like or easy to get, such as cloth, wood, acrylic
shell.
4.
Multiple use methods: You can choose open, semi-open, or closed methods
according to your personal preferences. The open type and semi-open
type are suitable for those who need to operate the machine frequently;
the closed type is suitable for people who mind smoke, or peope who want
to store the machine for a long time to prevent dust.
5.
Solid and easy-to-install structural design: The box is constructed of
all-metal frame, which is very sturdy and durable. The installation
steps are very simple, just tighten the screws and complete the
installation in 3 steps.
6.
Full eye protection design: The fully covered red shell can filter 98%
of ultraviolet light, the laser is no longer dazzling, and you and the
people around you can watch the laser engraving more conveniently.
Product model: SCULPFUN 720x720x360mm Smoke Exhaust Box
Space size: 720x720x360mm
Frame Material: Aluminum Alloy Metal
Fan extraction speed: 10m/s
Fan power supply: 5V USB plug
Mode
of use: open, semi-open (open, semi-open is suitable for people who
often need to operate the machine); closed (closed for people who mind
smoke, or store the machine for a long time to prevent dust.)
Packing weight: 4kg
Packing size: 400*240*200mm
SCULPFUN 720x720x360mm Smoke Exhaust Box Packing list:
1× Metal frame Set
1× Covering shell Set
1× Exhaust Fan Part
1× Installation Tool Kit
1× Instruction manual
Note:
●For detailed machine instructions, please refer to the manual or installation video .
●Please do not use the laser machine unattended.
SCULPFUN 1440x720x360mm Smoke Exhaust Box
Main feature:
1.
Super large working space designed by official SCULPFUN: Unbelievable
super large working space of 1440x720x360mm, designed by the official
SCULPFUN, can be perfectly adapted to the expanded engraving machine on
the market, such as the SCULPFUN S9/S10 950x410mm expanded engraving
machine.
2.
Super suction fan: The box is equipped with a super high-speed fan of
10000r/min, which can generate strong suction force. And more than 10m/s
suction speed can quickly exhaust the smoke from the box
3.
Modifiable box: We provide a solid frame and a powerful suction fan,
which are the main units. As for the shell, you can remove the original
shell and modify it according to your own imagination, you can choose
the material you like or easy to get, such as cloth, wood, acrylic
shell.
4.
Multiple use methods: You can choose open, semi-open, or closed methods
according to your personal preferences. The open type and semi-open
type are suitable for those who need to operate the machine frequently;
the closed type is suitable for people who mind smoke, or peope who want
to store the machine for a long time to prevent dust.
5.
Solid and easy-to-install structural design: The box is constructed of
all-metal frame, which is very sturdy and durable. The installation
steps are very simple, just tighten the screws and complete the
installation in 3 steps.
6.
Full eye protection design: The fully covered red shell can filter 98%
of ultraviolet light, the laser is no longer dazzling, and you and the
people around you can watch the laser engraving more conveniently.
Product model: SCULPFUN 1440x720x360mmmm
Smoke Exhaust Box Space size: 1440x720x360mm
Frame Material: Aluminum Alloy Metal
Fan extraction speed: 10m/s
Fan power supply: 5V
USB
plug Mode of use: open, semi-open (open, semi-open is suitable for
people who often need to operate the machine); closed (closed for people
who mind smoke, or store the machine for a long time to prevent dust.)
Packing weight: 5.7kg
Packing size: 415*280*205mm
SCULPFUN 1440x720x360mm Smoke Exhaust Box Packing list:
1× Metal frame Set
1× Covering shell Set
1× Exhaust Fan Part
1× Installation Tool Kit
1× Instruction manual
Note:
●For detailed machine instructions, please refer to the manual or installation video .
●Please do not use the laser machine unattended.
SCULPFUN S9 Air Assist Kit
Main feature:
1.
Official SCULPFUN S9 Air Assist: This is a standard S9 air assist
nozzle designed by SCULPFUN, it is an all-metal structure and fits
perfectly with the S9 laser. Installation is very simple and you only
need a few minutes to install.
2.
High-speed air-assist nozzle: Like the S10 nozzle, it is a high speed
air-assist nozzle with advanced fluid mechanics design. Only a 30L/min
air pump can achieve a high-speed airflow of 13.5m/s.
3.
Faster and cleaner cutting: S9 air assist will greatly improve the
cutting ability of the S9 laser. With air assist S9 cuts plywood and MDF
boards 2-3 times faster, and cutting surfaces are cleaner and no smoky.
4.
Excellent air sealing: The S9 nozzle has a sealing ring, and the air of
the air pump will not leak from the gap. In addition, the sealing keeps
out dust, which will increase the lifespan of the S9 lens.
5.
Complete accessories for air assist upgrade: The product includes
SCULPFUN 30L/min silent air pump, S9 air assist nozzle, air pipe,
sealing ring and other installation accessories you need. You don't need
to buy additional accessories, directly to upgrade the S9 machine.
Product Model: SCULPFUN S9 Air Assist Kit
Air
Pump: Note that when you buy the kit that includes an air pump you need
to double check that the voltage matches your local voltage. US version
110V, European version 220V, please select the correct version.
Interface diameter size:
Air-assisted copper tube outer diameter: 8mm
Inner diameter of air pipe: 7.5mm
Package weight: 1.76kg
Packing size: 255*192*145mm
1× 30L/min air pump EU Version 220V
1× Nozzle Kit
1× 2 meters pipe
1× Tool Kit
1× Manual
Note:
●Because
of the powerful laser with air assist, it is forbidden to run the
engraving machine unattended. Pause it if you're not around.
●For detailed machine instructions, please refer to the manual for parameter settings.
●When operating the laser engraving machine, please wear protective goggles.
●Do not touch the laser with your hands, otherwise you may burn your hands.
●Please avoid strong impact on the machine.
●It is forbidden for children under 14 years old to use this product, and children over 14 years old need adult attended.
●Do not use the laser directly to any specular reflection object, which may cause injury to the operator or burn the laser.
SCULPFUN 30L/Min Air Pump
Main feature:
1.
Great Air pump suitable for laser engraving machine: SCULPFUN 30L/Min
air pump is very suitable for air-assisted laser engraving machine, it
can be perfectly suitable for SCULPFUN S10 or other similar air-assisted
laser engraving machines.
2.
High durability: This air pump has been produced and sold in the market
for more than 10 years. After long-term testing and verification, it
has extremely reliable function and stability.
3.
Adjustable speed: The air pump has a speed control design, you can
adjust the flow rate from 0-30L/Min by rotating the regulator, and
adjust the airflow speed according to the needs of the laser engraving
machine.
4.
Low noise and low vibration: Upgraded silent design, the internal
structure of the machine and the external anti-vibration feet greatly
reduce noise or vibration, providing a quiet working environment less
than 40dB.
5.
Stable air pressure output: High stability design, it can maintain a
stable air output even if it has been working for a long time.
Product information:
Model: SCULPFUN 30L/Min Air Pump (European Version)
Voltage: 200-240V
Power: 16W
Maximum air pressure: 0.03Mpa
Outlet diameter: 8mm
Packing weight: 1.69KG
Package size: 19x25x13.5cm
Packing list:
Air pump x1
Accessory pack x1
Note:
You need to check the local voltage carefully, 200-240V is only
suitable for the European version, 110-120V is only suitable for the US
version, the two version cannot be used in common.
SCULPFUN S10 engraving area expansion Kit
Main feature:
1.
Quickly expand the engraving area of SCULPFUN S10 in low price : By
replacing the frame shafts of S10, it can quickly obtain a huge
engraving area of 410x940mm(226% area of standard S10). Meet the needs
of large-area engraving users.
2.
Reserved holes for limit switches: Limit switch holes are reserved on
the extended Y-axis of S10 (limit switch mounting holes are also
reserved on X-axis of S10), so that you can buy cheap limit switches
accessories to upgrade the limit switch or laser homing function.
3.
No additional processing need, directly use: The extension shaft is
standardized processing, it can be directly assembled on the S10
engraving machine without any other additional processing. There are
other necessary accessories in the product list, including extension
cables, belts, and screws. No need to purchase any additional
accessories.
4.
High-precision production and quality: The extension shaft and cable
have undergone rigorous testing , so that it keeps the same accuracy and
stability as the standard S10 engraving machine. Guarantee high-quality
engraving and cutting.
Product model: SCULPFUN S10 engraving area expansion Kit
Engraving enlargement size: 410x940mm
Package weight: 1.4kg
Packing size: 114*5*10cm
SCULPFUN S10 Expansion Kit Packing List:
2× Y-axis extension shaft
1× extension cable
4× 1.3m extension belt
4× T type screw assembly
1× installation manual
SCULPFUN S10 Laser Engraving Machine
Terms & Conditions
Payment
We accept payment via Credit Card、Debit Card、Apple Pay、Google Pay or PayPal etc.
Payment must be cleared within 4 days after you submit order. Your unpaid orders may be canceled if you can not clear
payment on time.
Please contact us via ebay massage to list your special requests (color, packages, etc.) immediately. We can not change your
address and color once we've dispatched package and deliver to the shipper.
Shipping We arrange the shipment from Monday to Friday. Shipping fee includes packaging and handling fees.
Items will be send as our promise handling time after Payment Verified (Available on business days only).
Please check your ebay shipping address before payment, and make sure it contain a valid phone number Because almost all shipping request phone number, we may hold the order if phone number is missing .
If the item is from China, Tax is buyer's responsibility, we can declare a low price to reduce or avoid customs tax, but we don't take responsibility if buyer don't clear the customs.
Return Please freely contact us to find solution by ebay message before you open a return/case. Communication always is best way to solve problem.
We accept any return in 30 days that we promise.
If buyer return it just because buyer don't like it or bought a wrong item, it is buyer pay for return shipping fee.
if item is defect or wrong when it. we will pay for the shipping fee after buyer show the shipping invoice.
Please never return the parcel without agreement , if you don't get RMA NO. from us, it is no possible for us to get the parcel. and we will take no further auction for the return.
Feedback We will automatically leave positive feedback to every buyer who completed the transaction.
As you know feedback is important for all seller. We at strive to give all of our customers a 5 star service.
If you receive the product ordered within a reasonable time, Please leave us a 5 star rating for each of the (DSR). As this helps us maintain a quality service.
If you're not satisfied with our goods or service, Please freely contact us by message.Communication is very important, we believe we can resolve all the problem with you.
About us
It's our pleasure to answer any questions you have. Please send us a message through eBay and allow 24 hours for reply
Our working time: 9:00 AM - 18:30 PM (Beijing Time GMT+8 ), Monday - Friday. (weekend and holidays excluded).